Originally, it was just an ordinary switch to control the lights on the balcony, and I wanted to exp

Updated on Balcony 2024-08-27
3 answers
  1. Anonymous users2024-01-24

    A switch is generally a closing and opening of the live wire. Remove the switch, there are only two wires inside, that is, the live wire, one is the incoming circuit, and the other is the circuit. When the switch is touched (turned on), the light comes on. You can't connect to an outlet because there is no neutral wire.

    However, there is also another wire hidden in the switch box, which is not connected. This line is usually the zero line. With this neutral wire, you can connect to an outlet or some other circuit.

    The original switch is removed, and your light is gone. If there is a neutral wire in the switch seat hole, it is convenient for you to connect something else.

  2. Anonymous users2024-01-23

    If there are only two wires in the switch box, you can't connect to the socket, and you have to connect another neutral wire from another junction box.

  3. Anonymous users2024-01-22

    That looks at your switch wire box has no zero wire, the general switch controls the live wire, if there is a zero wire, you can connect the socket, pay for the five holes you can, but I don't use the computer to draw.

Related questions
Originally, there was a single-turn switch in the living room to control the main light in the livin
3 answers2024-08-27

Generally, there is no zero line in the switch, only two wires can be seen from your switch, a live wire, a control line, so that you need a zero line to connect the corridor light to a single control, this zero line needs to be taken from the living room lamp to the switch, or taken out from the nearest socket, the connection method is as shown in the figure:

A switch controls two lights, one controls the living room, and the other controls the bedroom
1 answers2024-08-27

You need to use a double-open and double-control switch, which can turn on or off the living room light in the bedroom; In the living room you can turn off and on the bedroom lights. Right?

TOTO toilet is a switch how to control the amount of water
3 answers2024-08-27

It is necessary to adjust the height of the inlet valve to adjust the water level >>>More

The two-way switch controls one in the toilet and the other outside the toilet, I want to install a
1 answers2024-08-27

You can find the live wire on the switch and connect it to the fan, connect a switch directly to the fan, and then find the neutral wire from the lamp and connect it to the other wire of the fan.

A switch, control a lamp I want to connect a bedside lamp has reserved two wires to the bed
2 answers2024-08-27

One switch controls one light, and it's a bit difficult to connect two switches to control one light.