Some balcony beams are not the same when calculating the amount of formwork, and how to calculate it

The formwork calculation rule for stairs and balconies is the projection area calculation, the formwork of the façade is not calculated, and the staircase cannot be calculated according to the oblique length. >>>More

The so-called component is the component and its information, which have not yet been drawn. Using the component you built, after drawing it, that thing is called an element. >>>More

Just add a ring beam, and the outside is flush after adjusting the elevation. Or directly with an axis offset of 0 and trace along the boundary of the exterior wall. For example, bathroom sill tables, external wall convex lines, pipe well sill platforms, etc., can generally be satisfied with ring beams, and can be intelligently the same wall, the same beam, the same axis, and the elevation also has a lot of default parameters, and the overlap judgment of structural columns, wall beams, and masonry is obviously different. >>>More

The calculation rules for the maximum width of the balcony are as follows: 1. The cantilever plate (straight balcony, awning and curved balcony, awning) is calculated by solid volume according to the size shown in the figure. The beams protruding into the inner part of the wall and the lintels through the openings of doors and windows should be combined and calculated separately according to the lintel items. >>>More

It is calculated as half of the projected area of the outer edge of the balcony railing, and if the beam is outside the outer edge of the railing, it is not counted as the area.