How to make hot water from natural gas in the bathroom

Natural gas water heaters cannot be installed in restrooms. Because the gas water heater needs to consume a lot of oxygen during use, and the bathroom is a closed space, if the lack of oxygen in the bathroom is caused, a large amount of carbon monoxide, carbon dioxide and other toxic gases will be produced, which is easy to cause hypoxia and fainting accidents during the bathing process.

Gas water heaters are not easy to use, and the water flow rate should be considered first. >>>More

There should be an exhaust fan in the bathroom, and it is best to install an air alarm short-circuit in the bathroom.

Hello; If there is water in the shower but it is not hot, the water heater does not burn, it means that the water pressure flow is due to the situation, it may be that there is a blockage in front of the shower, such as a filter screen, a blocked pipe, etc., you can check it, if there is no water at all, then it may be a pipe error or a broken valve The possibility of blockage is not excluded, you check carefully, loosen the joints of the shower one by one to observe the water pressure, and further judge the cause of the failure, I hope it can help you.

1. Gas water heaters are usually installed in the kitchen, because the code does not allow the gas pipe to be installed in the bathroom. In the project, hot water is buried in the toilet (PB pipes are the majority). 2. If there is no problem with the buried pipeline, it is recommended to use a gas water heater; If there are no restrictions on the installation of equipment on the roof, it is highly recommended to install a solar water heater. >>>More