Why do you need to beat the floor, nail and glue to install the general solid wood floor?

Updated on Solid wood 2024-08-21
1 answers
  1. Anonymous users2024-01-24

    The solid wood floor can be directly paved on the foundation ground by the suspension installation method of the judgment car. However, the ground flatness requirements are higher, and the two-meter drop is less than 3MM that meets the basic installation conditions. If conditions permit, consider doing cement self-leveling treatment, and it is best to pave the floor after 48 hours.

    The main purpose of installing the ground keel on the solid wood floor is to level the ground, but the stability of the ground keel itself is not good, and if it is not treated with moisture and insects, it may increase the instability factor in the future. And there will be noise on the floor.

Related questions
1 answers2024-08-21

Generally speaking, about 20mm is enough. Papa Bear graphene self-heating floor does not occupy a floor height, and can also be heated in winter. Compared to traditional flooring, it is not so cold in winter. Compared with traditional water floor heating, it does not occupy the height of the floor, and has obvious advantages.

3 answers2024-08-21

10% or so.

If you haven't installed solid wood flooring yet, don't install it. >>>More

3 answers2024-08-21

It only takes 7 days to place an order, and it only takes 1 and a half days (100 square meters) to install 2 people.

4 answers2024-08-21

Let me talk about it, the first choice is Jiusheng flooring, 0 methanol, my home is their solid wood flooring, the quality is particularly good, very wear-resistant, and there is no warping, deformation, etc., it is very good to use.

2 answers2024-08-21

Generally speaking, it takes 1-2 months, and the windows and doors should be opened for ventilation, and it is best to turn on the electric fan to have a better effect, at this time, it is better if activated carbon is used, because activated carbon can be sensitive to harmful gases, especially when the air flows, and it is necessary to use professionally produced activated carbon.