-
Anonymous users2024-01-24It is too unhygienic to connect the 50PVC drainage pipe to the riser and directly drain the toilet, and you need a variable diameter tee, a telescopic joint, a bottle of PVC glue, 50 drainage pipes, 50 elbows, and 50 water traps See more answers
If you use nails, they will break, you can put the nails on the fire and grill them hot, and use the nails to heat the sewer pipe, and it will not crack.
No, because if the three passes are canceled, it will leak even more!
Measure the size of the tape measure to make clothes, measure the thickness to the building materials market to match or saw, take it to the building materials market, try to replace it with a slightly larger set, try to have an adhesive seal, try it, almost the kind of seal is good, don't be too big, the sealing will not be good! Isn't it too thin, the metal pipe can still be welded. This is the only way to use PVC.
You have to glue it all. It is wrong not to hit the upper mouth, because the pipe is damp, and when it is cold, condensation will slowly flow out of the upper mouth. Those that play a telescopic role have expansion joints.
Hello, Lamai is happy to answer for you. Toilet 110 riser tee to the toilet reserved mouth plus 45 degrees of short pipe calculation formula. The algorithm of the oblique tee is very simple, the distance from the tee to the toilet is equal to the vertical wheel from the main tube to the toilet Zen comic distance multiplication, the principle is that in the isosceles right-angled triangle, 2 right-angled sides are equal to 1, then the bottom edge is equal to 2 open root number, that is, 1*.