-
Anonymous users2024-01-24I also encountered the same problem, if the angle valve is closed to stop the water inlet, and no longer leaks, then it means that the seal is not broken, and the float is not broken, but the tank cover presses the float, so that the float cannot rise to a sufficient height to close the water inlet valve, and the water inlet valve continues to enter the water, causing water to flow out of the overflow valve, forming a water leak; In this case, the water tank cover should be raised high, and the problem will be solved (pay attention to the soft pads at the four corners of the water tank cover, which is the function).
-
Anonymous users2024-01-23You see if the place under the toilet is not placed, the contact is not too good, it should be put smoothly and glued with cement.
-
Anonymous users2024-01-22Answer: Hello, there may be two reasons for the leakage of the toilet, one is that the water tank is leaking, and the other is that there is a leak at the bottom. We need to distinguish what kind of situation it is, and then address the symptoms. If the water tank is leaking, most of the parts are faulty, such as the drain valve, water inlet valve or float device, which is worn and aged after a long time, or the water leakage problem caused by the poor sealing of the various connections of the drain pipe.
It's also relatively simple to solve, make adjustments first. After using it, the button does not rebound, and after pressing the reset again, it will be fine. It is also possible that the connection of the inlet valve is loose or damaged, and the corresponding parts can be replaced.
-
Anonymous users2024-01-21As a reminder, there will be internal leakage in the toilet, that is, there is no leakage in the toilet or outside, but the water meter is turning. It happened to my family. More than 100 tons of water leaked in a month, which is scary. Replaced the contents of the tank.
Here's how to fix a leaky flush toilet: Materials: Slotted taper, rubber sheet, double-sided tape. >>>More
Nowadays, people's living standards have improved, and more and more people pay attention to physical health. It is believed that the bidet toilet is a more comfortable toilet device, and it is relatively safe for the elderly and children to use. Bidet toilets generally have a flush tank, what should I do when the water tank of the flush toilet leaks? >>>More
Replacement of accessories... If the water valve is broken, just change it, and online shopping is 30 yuan. But before you buy, you need to know what model you need to buy.
There are two situations of water leakage in the water tank, 1: the outlet valve is leaking, the inspection method is to close the water inlet triangle valve, if it has been leaking, it is the leakage of the water outlet valve, just see whether the seal is deformed, or there are impurities; Another situation is that the button does not pop up, open the water tank lid to make it pop up, generally there is debris stuck, just clean it. 2；The water inlet valve is not closed tightly, the water has been added to the water tank, the water flows out from the overflow port, and the water inlet triangle valve will not flow again after the water inlet valve is closed, but the water in the water tank is still full, you can judge that there is a problem with the water inlet valve, and this situation can clean the valve seal.
The toilet can't pump water, you first have to consider whether the toilet is blocked, the way to check whether the toilet is blocked: flush the toilet with a basin with water, if you use a basin to flush the toilet, you can flush it normally, indicating that the toilet is not blocked. At this time, it can only be that there is a problem with the accessories in the toilet tank, you can use a basin to add more water to the tank, and then press and hold the toilet button for a long time to observe the flushing effect, if the flushing effect returns to normal, then the problem is basically found, this is the toilet tank accessories are broken.