It is better to lay the outdoor balcony dry or wet.

The floor is tiled, and most people currently use the dry paving method, and there is less wet paving. Dry paving method refers to the method of sprinkling water and stirring evenly with 1: volume ratio) cement and sand to form a dry cement mortar (dry and wet consistency, it is advisable to knead it into a ball by hand and not loose), and use tiles to level the ground. >>>More

Regardless of whether the tiles are dry or wet, they actually have no effect on the waterproofing of the bathroom. As long as the bathroom waterproofing is done in accordance with the requirements of the standard, then no matter which method is used, there is no problem with tiling. The bathroom is waterproof, the standard requirement is that the ground needs to be done, the wall should be at least meter, it is recommended to do the full height, if it is a lightweight wall, then it must be done full height. >>>More

The wall tiles I have seen now are all wet paving, and some special requirements are dry hanging, but only the bricks that integrate the wall and the ground. The current coagulation of dry paving is poor, a process is required, the dry paved floor tiles are only preliminary condensation after 24 hours, and they can be easily pried up with 1 flat head cone (when you lift the first one), the bricks are not damaged, and the cement and bricks are basically not adhesed. >>>More

If you dry paving, water is easy to seep into the brick joints, there is a dry paving layer, but a water storage layer is formed here, and if the water is stored more, it will leak out of the weak place, so you should know what method is good, now more than half of the water leakage on the bathroom floor is caused by dry paving! >>>More

Now the paving tiles are basically using the dry paving method, but the bathroom is best to use the wet paving method, which is not easy to seep water, but the wet paving method is easy to have hollow drums, so we must pay attention to check when paving.