-
Anonymous users2024-01-24Carefully check whether the gluing on the decorative parts of the edge and surface of the plate is uniform, whether the bonding is firm, whether the trimming is smooth and smooth, and whether the parts are on the side panel, door panel, drawer panel and other visible parts at the lower mouth.
Whether the surface is edge-banded or not, there is no trace of bonding on the edge profile of the well-decorated board. The assembly combination mainly depends on whether the tongue and groove at the drilling hole is delicate and neat, whether the connector is firm after installation, and whether the plane and the end.
Is there a gap in the T-shaped seam after the surface is connected, and there is no loosening phenomenon when pushed by hand.
The quality of the furniture plate can be seen with the naked eye to see the surface smoothness and flatness of the furniture plate, and the glue bonding of the plate section. Then look at the edges used to make furniture. Finally, smell for odors.
One is to look at the brand, the second is to look at the price, the third is to look at the senses, feel, flatness, and the fourth is to see what tie rod and what keel and other auxiliary materials are used.
Beneficial home formaldehyde-free health board. Whether the plate is good or not mainly depends on the environmental protection level. Good plate to have a good home environment, the choice of plate to be environmentally friendly, formaldehyde release must be within the national standard, there is an E1 level logo is the national environmental protection standard, the average amount of formaldehyde emission is less than milligram liters of the plate. >>>More
Panel furniture is drilled to install connectors and wooden tenons, and carefully observe whether the internal material exposed by the drilled holes is uniform in density and color, and has no pungent odor. It can be used as a basic judgment of quality. However, there are too many types of composite boards, and it is still difficult to distinguish without certain experience, so it is best to have a friend in the industry to accompany you to buy.
1. Investigate the technology of log furniture. In addition to the color and natural markings of log furniture, the delicacy of the technology and the shape are not beautiful, whether the mortise and tenon connection is robust, whether the joint is tight and clean, whether the paint film is translucent and smooth, whether the carving is clear and clear, whether the inlay is intact and bright, whether the rounded corners are smooth, whether the lines are uniform and straight, and whether the decoration is proper. Only the technical and profound log furniture has the value of art and value preservation. >>>More