What is the form of drainage of the toilet bowl?

1. There are two main drainage methods of toilet toilets: rear drainage and lower drainage. Toilets with rear drain and lower drain cannot be mixed. It is important that the drainage hole is on the ground and is the lower drain, and the drainage hole is on the rear side wall and is the rear drain.

Each toilet is specially designed for different drainage methods and cannot be mixed.

Second, the flushing function of the toilet toilet. From the perspective of flushing methods, toilets can be roughly divided into: flush type (ordinary flush) and siphon type.

Among them, the siphon type is the most water-saving and has the best effect. The difference between the siphon type and the ordinary flushing method is that it flushes the water while achieving the siphon effect through a special curved pipe to quickly discharge the dirt.

3. Siphon type is divided into flush type, vortex type, jet type, etc. The siphon vortex and jet types are equipped with a special water inlet channel, and the water from the tank flows into the toilet under the water level, so as to eliminate the noise generated by the air impact in the pipe and the water falling into the water when the water enters the tank. The siphon jet type has a unique water nozzle that can spray a strong stream of water for better flushing results.

The toilet is only a siphon type, and the squatting pit has a straight fall with a siphon.

There are two types of normal; Drop-off and siphon.