-
Anonymous users2024-01-24The reason for the cracking of solid wood is mostly because the material itself is not dry enough, and after paving, it will burst when it is gradually dried.
The main reason for the deformation of solid wood boards is moisture, so the way to prevent the deformation of solid wood boards is to paint, wax, and do moisture-proof treatment.
The shrinkage of solid wood boards is actually due to thermal expansion and cold contraction.
-
Anonymous users2024-01-23The problem of stepping plates, the drying, anti-corrosion and other treatment of the plates are not good! The main reason for cracking is that the plate is not well dried, and the internal and external shrinkage is inconsistent! Use putty or epoxy resin to make up the level, and the color is the same as the original tread board!
-
Anonymous users2024-01-22The market is maturing. If it's not good, it must have a wide range of uses. The traditional Dongdong period slowly evolved. You promote her. He has a market!
-
Anonymous users2024-01-21If the wood is not dried and degreased, of course it will crack. It is recommended that you choose the top ten brands of stairs, such as Meibu, Jinlong Yabu, and Qiyufang, which are all top ten brands and are trustworthy.
-
Anonymous users2024-01-20It should have been made before the board dried.
The general one is 2 centimeters, but in fact, there are only centimeters, centimeters, and centimeters. Like the rotary, the bracket staircase should be slightly thicker, 4 centimeters, centimeters. >>>More
The general one is 2 centimeters, but in fact, there are only centimeters, centimeters, and centimeters. Like the rotating, the bracket staircase is slightly thicker, 4 cm, cm. >>>More
Anhui Busheng Stairs Factory, to tell you, is not possible, if not leveled to level first, and then paved the board, there are many ways to level, such as leveling with cement, such as leveling with wooden strips, woodworking boards, and so on
In addition to the defect that wood is easy to decay, another important defect is that it is easy to deform and crack. Due to the characteristics of wet expansion and dry contraction and anisotropy of wood, if the moisture content of wood occurs in the process of use, the wood will be deformed in all directions, but because the tangential shrinkage of wood is much greater than the radial shrinkage and the moisture content gradient between the inner and table, this deformation difference will produce stress when the wood is deformed, and when the stress exceeds the tensile strength of the wood, the wood cracking phenomenon will occur at the stress point, and the common ones are end cracks, surface cracks, internal cracks, wheel cracks, etc. The degree of deformation and cracking of different types of wood varies greatly, and generally the harder the wood, the more likely it is to occur. >>>More
With the improvement of everyone's living standards, the requirements of the board are getting higher and higher, the solid wood slab is more popular this year, the quality of the solid wood slab is OK, the stability of the material, the mild color makes you feel the breath of nature, the warmth of the home, the smoothness of the pattern is favored by the majority of customers and friends. Dripping water in the gaps of the solid wood slab, it is recommended that you repair it in time, and take corresponding measures to see the specific slag cavity pulse, the gap is larger, you can use white latex and putty powder to fill it after stirring, and the gap is small, brush the transparent paint, then use the transparent putty batch scraping. When using solid wood slabs, we should pay attention to maintenance, and the most important thing is not to expose to the sun, so as to prevent cracks.