-
Loosen the fixing screws between the float and the valve, then adjust the height of the float to a suitable level, and then tighten the fixing screws.
Two: one side of it is an adjustment screw, if the water level is too low, use a screwdriver to adjust it counterclockwise. >>>More
Adjusting the water level can prevent splashing, the reason is that the poop is pulled to the toilet wall, so how ugly is the toilet, and the smell, not hygienic at all, my experience is to use a toilet splash anti-splash agent, the effect is good, you can carry it with you, you can also use it when you go to other people's homes, to prevent cross-infection, and do not do it?
There is a Phillips screw hole on the inlet valve, which is screwed clockwise to raise the float to increase the water level.
Arrow Toilet Flush Steps.
2. You can see a water inlet and a water outlet in the toilet tank. >>>More
Adjust the height of the float on the line, the water level is high, you adjust the float to the bottom 2--4 cm, there is a movable joint on the float rod, adjust the joint.