-
Anonymous users2024-01-24I guess there's plasterboard! Round edge banding with plywood! The frame has a wooden keel on it! The process is to draw lines, fix the wooden keel, seal the gypsum board (to apply less glue, otherwise the interface will crack after a long time), and edge sealing.
Ceiling decoration is a stage that must be experienced in the process of home decoration, the installation of ceilings is very important for interior decoration, and there are four common ceilings in the current home decoration industry, gypsum board ceilings, aluminum gusset ceilings, integrated ceilings, and soft ceilings. Among them, gypsum board ceilings are more concerned, so let's learn about them from the following. Construction process Elevation line of the elastic roof - draw the keel binning line - install the main keel boom - install the main keel - install the side keel - install the secondary keel - install the gypsum board - paint - finish cleaning - sub-item - inspection batch acceptance. >>>More
According to the measured size, screw into the expansion tube screw in the brick hole on the ceiling, pay attention to the sandwich height between the ceiling and the roof is not less than 25cm, the screw must be perpendicular to the ceiling, and fixed firmly, and keep parallel between the 6 screws. Subtract 5mm from the length of the installation and then cut off the required triceratops. After the triangular hanger is sleeved into the triangular keel, the triangular hanger is stuck on the main keel. >>>More
According to the design ceiling elevation elastic horizontal line - elastic keel binning line - installation of hanging points, hanging bars - installation of the main keel - installation of auxiliary keel - installation of gypsum board. >>>More
First, the installation of the ceiling construction steps of the keel boom with the horizontal line and the keel backbone bone line position that has been done, you can make the height below the boom. According to the keel dividing line and setting the hook distance of the keel boom, first buckle the side without screws on the steel bar that has been arranged, and the screws that have not yet been placed can be fixed with some expanded bolts first. Second, the installation keel of the ceiling construction steps first select the nut of the boom, install the hanger in the trunk bone, and then use the hanger to hang the main bone of the set up hanger according to the good position of the line, and pass it through the corresponding boom bolt. >>>More
Put the line first, and then play the hanging bar, install the corner line, the main keel, the upper plate, and the auxiliary keel. >>>More