-
Anonymous users2024-01-24The water inlet switch controlled by the float in the groove is broken, or the connection between the float and the switch has fallen, you can open it yourself to see, if the connection does not fall, it is the switch is broken, you can buy a new set of control switches in the sanitary ware store and replace it, and find a plumber if you will not change it.
-
Anonymous users2024-01-23The inlet valve gasket is broken, replace it with a new one.
Fill the bucket with water from the washing machine. Open the lid of the toilet bowl and pour it in, and you can flush it. After flushing, fill the tank with water, and you can continue to use it. If the bucket is large enough, it can be flushed directly to the toilet, and the effect is similar.
What he means: Your water is dirty, his clean, buy his. This kind of person is actually the most taboo to talk about peers.
How to adjust the toilet (toilet) water piece.
1. Installation and adjustment of water inlet valve. >>>More
When the small button is pressed, it consumes three liters of water to urinate and the large button is pressed, and six liters of water is consumed to flush the stool.
It could be that the float valve is broken.
Open the toilet lid, check that the float is in normal position and all parts are in good condition, remove the water inlet valve, and clean all the parts that can be removed with a brush, especially the rubber pad, which is normal after installation. The toilet has been used for a long time, and the inlet valve has accumulated debris and formed a slippery scale, and the air pressure water valve cannot be closed normally if it leaks. >>>More