How to make mahogany furniture round wraps

Updated on furniture 2024-08-25
1 answers
  1. Anonymous users2024-01-24

    The mahogany furniture production process is round, which is literally understood as the round legs and feet are wrapped by the round and mixed leg wraps and buttresses, and of course, the edge is also chamfered to make a mixed surface. Viewed from the side, the round legs and feet are wrapped in layers of rounded outer contours of the edges, buttresses, and leggings. More particularly, there is a method of splitting materials on the edge of the buttress and wrapping legs, that is, a material makes a double mixed surface or even more mixed surfaces, which visually increases the thickness and increases the level of the package, and then makes a double circle of clip flowers, which is amazing.

    First, the structure of the round package is exquisite. Not all round timber is used. The buttress edges and leggings are made of square timber, and the inner surface that you can't see is still square, and a small section of the round leg foot and the leggings must be rounded into a square to accommodate the fir.

    Second, the tenon and tenon structure of the round round round is exquisite. The outer skin at the end of the fir is cut at a 45-degree angle, intersecting with an adjacent lattice angle; Wrap the skin and leave the tenon, which is incorporated into the mortise on the legs and feet; Some of the tenons are offset by the angles, and some are long and short. The two ends of each buttress are angled and chiseled through the eyes, and the long and short tenons at the top of the legs and feet first penetrate the tenon on the buttress edges, and then match with the tenons and tenons at the four corners of the face.

    Therefore, the length and tenon of the top of the leg made of leggings are longer.

Related questions
1 answers2024-08-25

What is a mahogany home.

The "round wrap circle" in the tool >>>More

1 answers2024-08-25

Mahogany is a precious wood material, very precious, if it is large, there must be an overall plan, to make a large piece, then the value will be very high, and the piecemeal composition of mahogany furniture, from the whole will be almost, but compared to other wood material furniture, it is still collectible, must be well planned and used such a good material!

2 answers2024-08-25

Before waxing, you need to choose a good wax, preferably natural beeswax. And make sure that the mahogany furniture is clean. If the mahogany furniture has been waxed before, first scrub the surface with soapy water, then clean the soapy water with clean water, and finally wipe the freshly cleaned place with a clean cotton cloth, and then place the mahogany furniture in a ventilated place to air dry it naturally. >>>More

1 answers2024-08-25

The lighting of mahogany furniture is very particular, otherwise the noble mahogany furniture cannot be displayed under the light, so we must be cautious not only about the problem of lighting. First of all. >>>More

2 answers2024-08-25

Select the exhibition platform, select the location, decoration, select the product layout, cooperate with the exhibition platform to promote, carry out Internet promotion, media promotion, aviation magazine promotion, high-speed rail magazine promotion, and do a good job in the reception of the exhibition.