-
It's a lot easier than you to buy some tubes, buy some UPVC glue, and reconnect them with some UPVC glue
-
Slowly warp it off with a flat screwdriver! It's best to see all the connectors off and reinstall them.
It doesn't smell like anything, unless you don't flush it unless you finish it.
100 yuan, less no one to do, more is not worth it.
The bottom of the riser pvc110 tee is 30-35 cm away from the top plate surface, the expansion joint is installed below the tee, the floor drain and shower are all using the S bend with a cap, the basin is installed with a 90-degree cap elbow, and the S bend can be deodorized when installing the basin on this floor, and the kitchen sink drainage branch is installed on this floor, and the P bend with a cap is directly installed, I hope it can help you. It should also be noted that the smaller the distance between the tee and the top, the greater the net height of the bathroom.
Summary. Hello, according to the above description: this depends on the specific water leakage, if it is caused by the improper construction technology of the decoration company, then the decoration company must be held responsible. >>>More
Squatting toilet with S bend safety and anti-odor, there is a p bend can not be installed, the floor drain can not be odor-proof, anti-odor is difficult to get into the water, especially the floor drain of the bathroom, the three-way can be changed to be transferred, and it is easy to hang the items on the reverse It is easier to cause blockage.