-
Anonymous users2024-01-241.After the carpentry work is done, it must be left for a few days to wait for the water to evaporate before painting. This prevents cracking of the paint surface caused by excessive moisture in the wood, which can cause deformation of the furniture.
2.When painting, be careful not to make the paint surface too thick, the thicker the paint surface, the more likely it is to cause the paint surface to crack due to the uneven heat and cold of the surface and the inner layer.
3.When making the door cover of the bathroom, the back should be treated with anti-corrosion and waterproofing.
4.When making the door, do not stick to the wool ground, generally need to leave a certain distance, so that after laying the floor, you can prevent the door from sticking to the ground and absorb the moisture from the ground.
-
Anonymous users2024-01-23People all over China can't solve it. The most important thing is to be simple and simple, use less wood-based panels, less gypsum board.
1. It all depends on what is the balanced moisture content of the wood in your area, and how much the moisture content of the wood when you buy your furniture. The key is to see what the moisture content of your furniture wood is. If it is equal to or less than the equilibrium moisture content of the local timber, it is not a big problem; If it is larger, it means that the drying treatment before the furniture is not in place, it will dry out over time and the evaporation of wood moisture, and any anti-cracking measures are only an afterthought and expedient measure. >>>More
1. Pay attention to maintenance.
Solid wood furniture is very fragile, so when buying and moving, we should pay attention to being light-handed, and try to be as stable as possible during the handling process. And always pay attention to avoid collision damage as much as possible, place it steadily, and try to pad something to make it stable when encountering unstable places. Try not to move too much when you usually use it, and gently close or turn it on. >>>More
Finger-jointed board furniture is not really solid wood furniture in the traditional sense, it is called flat wood furniture, so finger-jointed board does not have the durability of traditional solid wood furniture. In addition, the finger joint board is generally made of pine, cypress and other forest wood, the material is not good, and its air-drying time is generally short, the water content is also large, it is easy to cause deformation and cracking. >>>More
For furniture, it is best to use solid wood furniture, and in terms of price, on the one hand, depending on the process requirements of furniture, the more complex it is, the higher the price. >>>More
Now that the network is developed, you can take a look at it online, the online ones are much more discounted than the physical stores, and all major brands have them, if the style is not at ease, you can go to the offline physical store to see, the specific style has the corresponding reputation, and the comprehensive comparison choice.