What should I do if there is water seepage in the bathroom of the house, and the walls on both sides

Updated on Bathroom 2024-08-30
1 answers
  1. Anonymous users2024-01-24

    There is no way to solve this, because the settlement has been continuous for many years, and the two buildings have been connected together, and the foundations are separated. You can only do waterproofing on the wall, and then deal with it after it settles and cracks again.

Related questions
3 answers2024-08-30

Analysis of the situation you described:

1. "Water leakage on the beam of the window" and "the location of the leakage is not in the lowest part of the bathroom" belongs to the normal situation of water leakage, and the current house is generally cast-in-situ can play a waterproof role, but there is a gap between the part of the cast-in-place layer and the beam or the part where the cast-in-place layer is combined with the sewer pipe, so the leakage often appears in these places. >>>More

3 answers2024-08-30

Analysis of the situation you described: 1. "Water leakage on the beam of the window" and "the location of the leakage is not in the lowest part of the bathroom" are normal conditions of water leakage, and the current house is generally cast in situ can play a role in waterproofing, but there is a gap between the part where the cast-in-place layer is combined with the beam or the part where the cast-in-place layer is combined with the sewer pipe, so leakage water often appears in these places. 2. What does it mean to "test the water but there is a large area of flowing water"? >>>More

2 answers2024-08-30

It should be that the pit pipe and the downpipe of the newly installed toilet are not aligned. It is recommended to reconnect below. Tightness is important.

6 answers2024-08-30

What to do if the bathroom is leaking.

Step 1: If the caulk between the gaps of the tiles in the bathroom is intact, then stir the caulk with water and wipe the gaps directly, and wait for 12 hours for the new caulk to dry! >>>More

4 answers2024-08-30

In rooms with waterproof requirements, such as bathrooms and kitchens, the floor is 50 mm lower than that of other rooms. In order to ensure the waterproof effect, the room with waterproof requirements, according to the design requirements, are surrounded by 120 mm high concrete walls, like a basin with a large mouth, and the waterproof requirements are indispensable for both the plane and the façade. But it is not done at the door, as if there is a small gap in the big basin. >>>More