What is the principle of laying moisture proof mats on solid wood floors?

What is the specific function of the gymnasium wood floor moisture-proof mat:

1. Moisture-proof and mildew-proof effect.

The main function of the wooden floor moisture-proof mat of the gymnasium is to isolate the moisture on the ground, and then play a moisture-proof role for the floor. Because the floor is a wooden material, its direct adhesion to the ground will cause the floor to become moldy or deformed due to the moisture and water absorption of the ground, so the use of wood floor moisture-proof mats can prevent moisture, and then can protect the wooden floor of the gymnasium.

> solid wood sports flooring installation.

2. Ground leveling.

There are many functions of the gymnasium wood floor moisture-proof mat, among which it can also bring the effect of ground leveling. Because the laying of the wooden floor of the gymnasium requires the ground to be flat and uneven, so as to bring better decoration, the use of wooden floor moisture-proof mat between the ground and the floor is conducive to leveling the ground and more conducive to the paving of the floor.

3. Increase elasticity.

The moisture-proof mat of the gymnasium wooden floor also has the effect of increasing the elasticity, and the moisture-proof mat is generally made of aluminum film, plastic film or special plastic materials, so the elasticity of the moisture-proof mat is very good. Therefore, laying a layer of moisture-proof mat between the floor and the floor can increase the elasticity of the floor, and then make the wooden floor of the gymnasium bring a softer and more comfortable foot feeling.

The brand sports wood floor will be installed with moisture-proof mat paving installation method, moisture-proof mat has aluminum film mat and conventional mat, aluminum film mat is generally pasted on the plastic mat with aluminum foil, its sealing, moisture-proof is better, can greatly improve the phenomenon of floor deformation and bulging caused by dampness and other reasons. However, some small businesses do not use floor mats, and even if they do, they use very thin floor mats, which hardly play a moisture-proof role. Consumers should also be aware that the smell of the mat during installation is best used with caution if it is very pungent and may contain contamination.

Moisture-proof mat is necessary for the wooden floor of the basketball hall, because the wooden floor of the basketball hall is made of wooden materials, if it is directly attached to the ground, the ground is wet and absorbent, it is easy to cause the floor to mold or deformation, the use of moisture-proof mat can isolate the moisture, so that the wooden floor of the basketball hall remains fresh and dry, especially in the southern region of the south, if you want to protect the ground, you need to use it. The thickness of the moisture-proof mat of the wooden floor of the basketball hall is generally between 1 and 3 mm, and the wooden floor of the basketball hall generally adopts the suspension laying method.

Prevent the moisture of the floor from affecting the floor, and the wooden floor is easy to warp when it is damp.

As we all know, when decorating, the decoration team will recommend that the bottom layer of the wooden floor be covered with asphalt and linoleum paper, and then a layer of cement will be sealed on the surface to prevent the release of harmful gases. Here is the easiest way, sprinkle the insect powder on the dry ground, and spread a thick moisture-proof film, because the moisture-proof film is generally about 5 10mm thick, which can effectively prevent the penetration of underground moisture, and at the same time take into account the position of the wall foot. If you want to prevent moisture more thoroughly, and then spread a layer of activated carbon, don't underestimate activated carbon, it can have the effect of absorbing moisture and insects, not only effectively preventing the deformation of the floor, but also absorbing indoor smoke and odor, adsorbing carbon dioxide, and improving the air quality in the room.

Wooden flooring "surface work" to do well.

After doing a good job of moisture-proof at the bottom layer, the next step is to do moisture-proof on the surface of the wooden floor. The easiest way is to wax our wooden floor, waxing can not only make up for the scars left on the wooden floor in our daily life, improve the brightness of the floor, but also the wax itself has the function of waterproof and moisture-proof. The number of waxing can vary depending on the old and new floors, the new wooden floors are beaten every half a month or a month, and after 3 or 4 waxes in a row, you can wax every six months like the old floor, so that you can effectively prevent moisture.

If you want to go a step further and protect against moisture, you can put a moisture-proof film on our wooden floors.

The floor mats under the floor are all different, many kinds including EPE ixpe of pearl cotton, there are perforated ones, there are peritoneal ones, and this thing itself is a closed-cell material, which can achieve a moisture-proof effect, and at the same time have a silent effect.

It is best to lay a moisture-proof mat, and even if the floor is dry, it will be damp. Moisture-proof mats are generally laid between the solid wood floor and the keel. This can not only isolate the moisture from the ground, but also allow the wooden floor and keel to have a certain cushion, like a gasket, and it is more comfortable for feet to step on it.

I am from Xi'an Huaao Wood, we are all paved like this, and it is rare to say that the moisture-proof mat is laid under the keel. It's just that some of the ground is very wet, and then waterproof treatment is done on the surface layer.

1. Play a moisture-proof role.

Be clear about the function of the moisture-proof mat for wood flooring. The main function of the wood floor moisture-proof mat is moisture-proof and warm-proof, because the moisture-proof mat is waterproof, it can play the role of moisture insulation. The moisture-proof mat of wood floor is the partition between the floor and the ground, which is laid close to the ground, and mainly plays the role of moisture-proof, protecting the floor, increasing elasticity and ground leveling.

2. Thicker is not always better.

Do not lay the wood floor moisture barrier mat too thickly. When laying laminate flooring, it should be noted that the floor mat is not as thick as possible, too thick floor mat has a lot of room for maneuver, and the elasticity will make the floor joints crack, and even cause the tenon to break. If the floor mat is too thin, the effect of moisture-proof and cushioning is relatively weakened, the elasticity is poor, and it cannot play the due leveling role, and the foot feeling is not good.

3. Cover the entire wooden keel.

In order to avoid the moisture on the wall from spreading to the wooden floor, when laying the moisture-proof mat, it is not only necessary to cover the entire wooden keel, but also to leave the moisture-proof mat along the corner of the wall for about 10CM. At the same time, there should also be an 8-12CM expansion joint between the wooden floor and the wall, and do not lay it too tightly.

1111111111111111111111111 outside

Moisture-proof mat is the partition between the floor and the ground, which is laid close to the ground, mainly playing the role of moisture-proof, protecting the floor, increasing elasticity and ground leveling. The quality of the moisture-proof mat is directly related to the service life and effect of the floor.

The thickness of the mat products sold on the market is not very consistent. When laying laminate flooring, it should be noted that the floor mat is not as thick as possible, too thick floor mat has a lot of room for maneuver, and the elasticity will make the floor joints crack, and even cause the tenon to break.

If the floor mat is too thin, the effect of moisture-proof and cushioning is relatively weakened, the elasticity is poor, and it cannot play the due leveling role, and the foot feeling is not good. Especially in southern cities, the climate is humid for a long time, so the requirements for moisture prevention cannot be ignored.

Solid wood flooring is made of natural wood, natural texture, comfortable foot feeling, good environmental performance, very popular and loved by consumers, so many families will choose to lay solid wood flooring.

The main function of the wood floor moisture-proof mat is moisture-proof and warm-proof, especially in the south, the rainy season is longer, and the wooden floor is easy to get wet.

Before laying solid wood flooring, it is necessary to ensure that the ground is flat, clean and dry before laying wood floor moisture-proof mats, and then solid wood flooring.

Moisture-proof mats play a role in the floor to insulate moisture, moisture, sound absorption, etc. Whether it is a household wooden floor or a sports sports wooden floor, moisture-proof mats will be used when laying. There are many kinds of moisture-proof mat materials, and there are more than one type, these moisture-proof mats can meet the basic needs of solid wood floor laying, moisture-proof, moisture-proof, so we can choose an economical and applicable one.

If you need some special features, you can choose according to your specific needs.

Moisture-proof mat is the partition between the floor and the ground, it will be laid close to the ground, moisture-proof mat is mainly to play a moisture-proof, protect the wooden floor of the basketball hall, increase elasticity and the ground to find the equal effect, the quality of the moisture-proof mat is directly related to the service life and effect of the floor, the thickness of the mat products sold on the market is not consistent, and the solid wood floor also needs to be laid with moisture-proof mat, especially in the south, the rainy season is longer, the wooden floor is easy to get damp, if you choose to lay solid wood floor at home, In order to ensure the moisture-proof effect and balance of the wooden floor, the composite floor generally only needs to lay about 2cm thick, if the wood floor moisture-proof mat is too thick, the wood floor has more room for maneuver, and it is easy to arch and deform after a long time.

Whether it is a solid wood floor for home decoration or a solid wood sports floor in a gymnasium, the primary maintenance point is moisture-proof, and the laying of moisture-proof mats plays a vital role in it, which also directly affects the presentation effect and use experience of solid wood sports flooring.

The main function of the moisture-proof mat is moisture-proof and warm-proof, because the moisture-proof mat is waterproof, it can play the role of moisture-insulation. The moisture-proof mat of solid wood sports floor is the partition between the floor and the ground, which is laid close to the ground, and mainly plays the role of moisture-proof, protecting the floor, increasing elasticity and finding the ground level.

A well-laid moisture-proof mat can make the solid wood sports floor not appear damp and rotten in future use.