Bathroom water transformation, how high is the distance between the hot and cold water outlet and th

Of course, the reasonable height of the sink is naturally very convenient in the practical process, and the main specification of the height of the bathroom sink is between 700 and 800mm. The user's height can be adjusted to the appropriate height.

Hand pool installation method:

1. Cut the basin installation opening along the cutting line and check it with the actual size of the basin.

2. Copy the opening diagram on the marble countertop, and use a pen to trace the opening line on the marble countertop to be cut. Note: Leave installation space under the marble table for faucets to install water supply pipes, drains, inlet angle valves, etc.

3. After drawing the marble opening line, drill a hole in the cutting hole, then cut the table along the inside of the drawn cutting line, and grind the cutting edge smooth.

4. Install the marble countertop.

5. Put the basin into the cutting hole of the marble countertop, correct the position, and draw the outline line on the countertop along the outer edge of the basin with a pencil.

It's usually rice, but you'd better look at the following basin cabinets that you like before making them. If it's custom-made at this height, there's no problem. Or your family's height is too high or too short, you can adjust it appropriately.

However, the height of some outlets depends on the location of other outlets in the original room, and if it is too different, it will be problematic to use.