-
Anonymous users2024-01-24This is a rotating buckle on the upper edge of the lampshade, you can touch it with your hands, break it out, the middle position of the four sides, each side has it, and you can take it off by breaking it all!
-
Anonymous users2024-01-23There is a card slot that can be opened in the gap between the ceiling and the roof, usually one in all four directions.
-
Anonymous users2024-01-22Just take it apart from the top to the bottom.
-
Anonymous users2024-01-21This ceiling is an integrated ceiling with a keel inside, and the canopy light is stuck on. You can remove the gusset on the side, grab the frame of the ceiling lamp with your hand and pull it down, and you can take the ceiling lamp down.
How to disassemble the ceiling lamp? Ceiling lamp disassembly method:
-
Anonymous users2024-01-20It should be stuck directly on the ceiling.
It should be that the ballast is broken, and the lamp beads should not be broken, because the lamp beads are LED and not easy to burn. >>>More
The buckle is movable, think about it carefully, and since it is not damaged, you can install it. If it really doesn't work, then find an electrician to help you install it.
The only way to remove this light is to pry off the metal frame and then find the mounting screws. If you want to replace the bulb, you just need to pry off the metal bezel and the lampshade will be removed.
Just disassemble it as you would normally dismantle other faucets, and turn the wrench counterclockwise through a gap at the root of it.
You don't need to take it off, use two sponges dipped in laundry detergent water, sandwich the screen in the middle, and scrub back and forth to make it clean.