-
Anonymous users2024-01-24It is more common for the drawings to be inconsistent with the actual size of the site, and the difference between the bathroom will be more, because the bathroom will shrink after the wall tiles are pasted. There is the thickness of the bricks, as well as the unevenness of the walls. When tiling, workers will lay out horizontally, and the corners of the wall will vary greatly, reaching as many as a few centimeters, so there will be deviations between the site and the drawings.
In this case, it should be subject to the actual situation on site.
-
Anonymous users2024-01-23As a bathroom, it is most important to reserve the drain for the bucket.
-
Anonymous users2024-01-22I don't know the specifics, but it's definitely different. The drawings only consider the usable area.
-
Anonymous users2024-01-21There are many possible causes, such as: the drawing design is not operable, the actual construction is unqualified, the construction personnel are not responsible, and the materials used are not the same, which may also cause inconsistency between the actual and the drawings.
-
Anonymous users2024-01-20Basically nothing is exactly the same!
Because of the characteristics of the bathroom, the waterproofing of the bathroom also has its characteristics: >>>More
The roof is waterproof, generally not protected, and needs to be resistant to the sun and freezing. Compared to this, the indoor has a protective layer and the life span is much longer.
Pay attention to the construction of waterproofing, whether the tiles are vertical and horizontal, and whether the reserved position and distance are reasonable. I am the foreman decoration network has a special supervision to assist in the acceptance, supervise the whole process of the project, and it is the construction first and then the payment.
This tile adhesive is really magical, I use a liquid tile adhesive called Yucan tile adhesive at home, the bonding strength is really incomparable, and then there is no problem with drilling holes on the tile, the general normal construction is to do brushing on the waterproof tile, if you want to stick firmly, you can apply a layer of adhesive on the waterproof without brushing. Hopefully this answer is satisfactory.
Waterproofing construction in the bathroom is nothing more than those few steps: 1substrate treatment; 2. >>>More