The sound of the ceiling cracking

Updated on Suspended ceilings 2024-08-28
4 answers
  1. Anonymous users2024-01-24

    There is a small chance that the ceiling will crack because the roof will not crack automatically without gravity.

    You said it was noisy, I guess it was the upstairs pouring water, the sound coming from the water pipes, because you said the kitchen and bathroom, where the water pipes are routed, so it's very likely.

  2. Anonymous users2024-01-23

    I don't know if the kitchen and bathroom ceiling in your home is a wooden keel or a light steel keel.

    Generally, if you use light steel, the possibility of keel fracture is relatively small.

    If it is a wooden keel, because the bathroom is relatively humid, and it also has to withstand the gravity of electrical appliances, it is still not very recommended to use a wooden keel.

  3. Anonymous users2024-01-22

    Generally, there are more water pipes in the kitchen and bathroom, and it is more complicated, which may be the sound of the water flowing! The material of the ceiling is generally aluminum gusset plate, and the possibility of grinning will be very small!

  4. Anonymous users2024-01-21

    How can the ceiling crack, absolutely not, it must be other sounds!

Related questions
3 answers2024-08-28

That's very, very normal, your house is too dry, is your furniture made of solid wood? Solid wood furniture begins to crack in about 3 years, and it is normal for the home to dry and crack. The humidity of solid wood furniture must be high, and the combination of dry and wet can protect the wood well. >>>More

2 answers2024-08-28

The water pipe upstairs burst! The water has flowed down through the seepage layer!

2 answers2024-08-28

Hit the glass glue! Or change the glass!

2 answers2024-08-28

If you make gypsum board, it is impossible not to crack, and there is no such problem if you make PVC or aluminum gusset.

1 answers2024-08-28

If it is only the formation of linear, angular or amorphous cracks on the ceiling paint film, it is not a big problem. This phenomenon may be caused by the first time, such as too thick or not dry and heavy, too loose or rough base, and mismatch between primer and topcoat. Fixes: >>>More