-
Anonymous users2024-01-24The problem you mentioned involves a problem of floor tile paving process, and the general living room floor tile paving adopts a dry paste process, which changes the wet practice of mortar cement. The tile does not need to be soaked in water in advance, and the base surface does not need to be wet, as long as the foundation condition of the pavement is better, so that the operation condition is greatly improved. Its adhesive effect also exceeds the traditional mortar cement, especially suitable for small and medium-sized projects and home decoration with a small working surface and an unsatisfactory working environment, that is, to use cement and sand to mix evenly in a certain proportion to do the bottom layer (often the label of this layer is not very high, and finally use plain mortar to evenly smooth and connect with the surface of the floor tiles (the label is very high, and there will be no hollow drum), so a few bricks in the center of your living room and dining room can be replaced, which will not affect the appearance, and the method is to use a hammer to knock it in the center of the brick. Then along the crack in the middle of the stripe to remove the entire surface of the bricks, and finally use a hammer to slowly knock off the concrete layer below, to remove small pieces, between the links must not be beaten with large tools, so that even if there is a water pipe below will not be affected.
In addition, in order to restore the beauty, it is best to form a unified pattern between the replaced bricks and the original tiles, and the style, appearance and glaze degree are almost the same. Feel free to do it, no need to worry about it.
-
Anonymous users2024-01-23It will not affect the surrounding floor tiles, find a good paving master, and pay attention to the coordination with the previous bricks when choosing bricks.
Are the water pipes you talking about underfloor heating pipes? Did you get the floor heating in your home, or did you change it yourself? If it is made in the project, it is paved with cement, and the paving master will not smash the waterproof.
-
Anonymous users2024-01-22Knock it manually, and tell the workers to pay attention to the point that it will not be broken.
-
Anonymous users2024-01-21Directly from the new layer on top, but the height of the floor will be reduced.
The fashionable style living room is open-plan, the center is an independent corridor, the spacious space is more convenient to enter and exit, the gray pattern polished marble floor tiles are paved, very smooth and natural, the ceiling design of the dislocation style above brings a three-dimensional sense, coupled with the built-in downlight placement, emitting a warm yellow light, and the entire space illuminated is very clear. The partition shelves are very practical, and some ornaments and porcelain are placed to make it look more abundant.
A suggestion to you, it's better not to partition – it's self-defeating if it's not well designed!
If the living room and dining room are connected, they should be laid with floor tiles of the same color and specifications, because this construction is conducive to increasing the overall sense of space, and there is a sense of transparency and expansion of space. The use of laminate flooring in bedrooms and study rooms is better, and you can move indoors barefoot in winter and summer, especially in winter.
No, there is a tin foil insulation pad under the geothermal heat, 3-4 cm is absolutely no problem, no more than 10 cm is fine.
There's nothing wrong with that, it's more comfortable to have a little carpet.