-
Anonymous users2024-01-24Three-in-one eccentric wheel special hole opener.
-
Anonymous users2024-01-23Woodworking drill bits or hole openers or blind hole drills are fine.
-
Anonymous users2024-01-22Position the punch with a woodworking 3-in-1.
Landlord, you still lack a screw fitting to hang an eccentric wheel, right? That's the case, the rubber plug fixes the screws, the wooden plug is directly connected to the board, the eccentric wheel and the screw are fixed, in fact, this is called a 3-in-1 component, and the panel furniture is like this, and generally each connection point needs these accessories. It's simple to install.
How do you remove rusty eccentric wheel nuts on old-fashioned shower room doors? Soak in oil.
34 handfuls! No 32's!
It mainly depends on the thickness of the board of your panel furniture, if it is relatively thick, you can punch a hole in the middle of the thickness of the board. If it is a thinner board, it is necessary to install metal edge strips on the four sides of the board to increase the thickness, and then punch holes in the middle of the edge strips. For example, the width of the edge strip is centimeters, and the hole is punched right there.
You can also use a screwdriver to tighten the screws and then it will not be loose, the general furniture installation master knows the structure of the three-in-one screw, I don't know how to explain it to you, it is always recommended to install furniture or find the furniture installation master of the furniture installation platform of Master Wan is more reliable.