-
Anonymous users2024-01-24Professional explanation: glass must be tempered, safety first, but the thickness is not necessarily the thicker the better, the thicker the glass, the heavier the weight, the life of the profile and pulley will be shortened, especially in the low-end shower room, most of the pulleys with poor quality, so that the thicker the glass, the more dangerous! The quality of tempered glass mainly depends on the degree of tempering, whether it is produced by a regular factory, light transmittance, impact resistance, heat resistance, etc., generally a good tempered glass surface will have tempered hot lines, generally 5mm glass is hard enough, Furui shower room stores around the general have a 6mm arched glass on the ground for people to try to step on, I have seen three or four people jumping together on it, and the glass is safe and sound, in the shower room is very popular in Europe and the United States, many shower rooms even use 3mm glass!
It's a misconception that the thicker the glass, the better!
-
Anonymous users2024-01-23The thicker the better, the tempered glass is best pasted with explosion-proof film, recently heard of a lot of shower room glass explosions, it is recommended that it is best not to use.
-
Anonymous users2024-01-22YES, TEMPERED GLASS, GENERALLY ABOUT 10MM.
The blasting point of tempered glass should be high, and it will not be broken when touched, even if it is smashed, it will not be like ordinary glass, broken out of pieces of edges and corners, which will hurt people, it will be radiated from the bad point, broken and broken, and will not stab people.
-
Anonymous users2024-01-21The glass of the shower room should be tempered glass. The general choice is mainly based on the usable area. If possible, the diaphragm tempered glass can also be selected, so that the safety factor is better.
It must be necessary to use tempered glass, otherwise it will be a big trouble to hurt people, generally regular shower room factory has 3C logo and insurance company logo when leaving the factory, as for the thickness, if the width of a single piece of glass is less than 60CM, use 6 centimeters, all within the safety range, if it is above 60CM, it is recommended to use 8 centimeters of glass as well.
Buy something, don't just look at the price, the brand is still very important, you can use some well-known brands of shower rooms, although the price will be higher, but the quality problems will be much less. But now it's not very popular to put explosion-proof film on the shower room, it seems that there is a special shower room, it seems to be sold on Taobao, of course, you have to pick a brand, guaranteed... Sometimes you don't always want that kind of import, and it's good to support domestic products once in a while. . .
Since the introduction of the national standard, China has canceled the national standard for semi-tempered glass, semi-tempered glass impact resistance, fragment state, thermal punch resistance are not in line with the current national standards for tempered glass, so semi-tempered glass is not safety glass can not be added 3C mark. >>>More
IT IS TEMPERED, THERE IS NO STANDARD BUT AT LEAST IT IS ALSO ABOVE 8MM.
Glass without the 3C mark is of course unqualified. At present, the common practice is tempered or tempered film, and all insulating glass is fixed-length, without on-site cutting, and there is no corresponding equipment. Insulating glass and tempered glass can be safety glass, but safety glass is not only these two current safety glasses, mainly tempered and laminated, and then used to synthesize hollow glass.