How to open the security door from the outside, where do I unscrew it

Updated on Security door 2024-08-06
1 answers
  1. Anonymous users2024-01-24

    The security door, if it can be opened from the outside, what is the security door? If there is no handle, knock on the door if you want to enter, someone can only enter when you open the door, this is called the anti-theft door, if there is a handle, it is useless, the inside is locked, there is a key to open it directly, and if there is no key, it will be handled according to the following method.

    The first step is to use the key in your hand to push hard twice on the outside, and if the key inside is horizontal, it can be pushed out. The problem is easily solved, and the jack can be twisted out.

    The second step, if it doesn't work after a few strokes, don't hit it with a hammer or brick, you can hit it out like netizens said. Try the new security door yourself and can't get through. It can also break the lock.

    The third step is to find an X-ray from the hospital. There is no way to find two unlocks, and they are all this way to open, to see if the lock on the crack of the door can be opened. This trick thin door can.

    Fourth, because it is a thick door, the door has a groove in the seam. The previous step cannot be opened. At this step, you can only destroy the door, which is also the method of unlocking, in fact, the 50 yuan of unlocking can be saved.

    If you pull the handle in the opposite direction or with the help of a tool such as pliers, the handle will fall off.

    Fifth, don't worry after the handle falls off, in fact, what is broken is only the shell of the lock, and the intermediate structure such as the lock cylinder is not broken. Just buy a shell and go to the lock shop. 50 bucks to buy a good one.

Related questions
1 answers2024-08-06

Stainless steel doors are generally made of channel cores, so there will be the situation you said. The solution is very simple, remove the handle of the security door, you will see a square iron pillar from the inside to the outside, replace this iron pillar with a short one, install it from the inside to the original position, and install the handle on it. The short iron pillar can be asked for by the merchant of the door, or it can be used for the original long truncation. >>>More

2 answers2024-08-06

What you said should be the safety knob inside the handle to install it, open the two screws on the handle on the inside of the door, and then remove the handle or install a new handle, (the knob is brought on the handle,) before installing the small iron piece inside the safety button on the handle into the corresponding lock body hole, and then directly press the handle Ning Screw OK!

2 answers2024-08-06

Normally, in such a situation, the only way to change the lock of the door is to change it. (A locksmith can open such a door, but it may cause some damage.) )

3 answers2024-08-06

Yes, you need to find a lockpicking company registered with the Public Security Bureau to deal with your problem. Don't look for a lockpicker who doesn't have a small advertisement for the record to deal with it. >>>More

1 answers2024-08-06

Normally, it can't be opened, but there is a professional door key that can open the anti-theft door, and it is a professional unlocker