What should I pay attention to when doing waterproofing in the bathroom?

The wall of the bathroom needs to be waterproofed, which is the standard of architectural decoration, which can not be ignored, and it will also affect your residence if you do not do waterproof for a long time, because there must be a room next door to your bathroom, and there is a simple decoration on the wall. If your hygiene has not been waterproofed for a long time, the water on the bathroom wall will easily corrode and affect your other rooms, so it is necessary to do waterproofing on the bathroom wall.

Pay attention to the joints between the edges of the PVC pipes and the floor slabs in the bathroom.

The general commercial housing is OK, but you only need to use the cement slurry diluted with waterproof glue to brush a few more times (each time before brushing to wait for the last time it dries, the wall in the bathroom is brushed a little higher), and the good thing is to use asphalt cloth to pave the low layer, and then add waterproof glue to dilute the cement slurry to scrape flat.

It's just a lot of work.

If you do it yourself, it is likely that you will not be able to do it well, and it will be very troublesome to redo it in the future, I suggest that you find a local waterproof company to help you do it, it will be better.

Regarding the waterproofing of the bathroom, I can give you the following suggestions::

1.The first thing to pay attention to when doing waterproofing in the bathroom is the choice of waterproof materials, and it is recommended that you can directly use the waterproof slurry in the kitchen and bathroom, which is specially developed for the yin and yang angles that are easy to seep into the kitchen and bathroom, wear pipes, sanitary ware, floor drain peripherals, etc., so the special materials are dedicated, the pertinence is stronger, and the waterproof effect is of course better.

2.The construction of waterproofing should be carried out in accordance with the requirements of the manual, the proportion of waterproof materials, the standard thickness and height of construction, etc., so as to ensure a good waterproof effect.

3.After doing a good job of waterproofing, it is necessary to do a good job of sprinkling and maintenance in the later stage, and places with direct sunlight need to be covered and covered.

4.The base surface before waterproofing must be cleaned, there can be no oil and dust, etc., and it must be sprinkled with water to moisten, but there must be no stagnant water.

5.After the waterproofing is completed, remember to do a 48-72 hour closed water test to check whether there are any leaks in the waterproof construction and whether the waterproof function is normal.