How to remove burrs from a rattan sofa

Because there is a varnish on the vine, the burrs on the vine will be very hard, so I recommend that if the burrs are not particularly thick and long, you can buy some varnish and apply it again. If you have to remove it, you can only sand it with sandpaper. And please be careful not to expose rattan items to the sun, so that no matter how good the quality rattan products are dried in the sun for a long time, there will be barbs after the varnish is brittle, and it is very troublesome to clean up.

Hope it helps!

Changle Weiyang

Sand it with fine sandpaper or scrape it with a utility knife.

The imitation rattan sofa is relatively smooth, some burrs on the real rattan sofa are determined by the characteristics of rattan, these fiber burrs are not suitable for grinding, grinding will grind out more burrs, and there will be grinding off the paint on it, this burr can only be removed with scissors to slowly repair and cut, but it is more time-consuming, you need patience and careful, and there is a cushion of some cloth that may be in contact with the body, which can also prevent the body from directly touching the burrs.

Hehe, the rattan sofa you bought may be a little lower grade, and the high-end one is basically burr-free. If it is easier to apply the supernatant paint, you still have to use sandpaper to polish, and then apply the paint after sanding.