What should I pay attention to when laying solid wood flooring?

1. The pavement scheme should be constant.

For each stadium, or theater stage, what materials to pave, and how to pave, are determined according to the actual parameters of the sports venue and the investment budget. Therefore, once the sports wood floor paving scheme is decided, it should not be changed easily.

Frequent changes to the design and construction plan of sports wood flooring will cause additional investment and even affect the construction period. Therefore, in the design of sports wood floor paving scheme, it is necessary to communicate and coordinate with sports wood floor manufacturers, clarify standards, and avoid unnecessary problems.

2. Customized products should be in advance.

The overall structure of the sports wood floor is basically all solid wood structure, and the moisture content of the floor will be done according to the climatic conditions and moisture content changes of the installation project site during production, which is generally about 6%-14% on average. Before ordering sports wood flooring, it is important to allow sufficient time for production in order to ensure the quality of the flooring.

3. Avoid cross construction.

Cross construction, that is, the paving of sports wood floors, is carried out at the same time as other construction projects of stadiums and conflicts with each other. The sports wood floor paving project should avoid cross construction, so as to affect the smooth progress of the sports wood floor pavement, or the construction of other stadium construction projects destroys the paved sports wood floor floor.

4. Supervision and acceptance should be involved.

Although it is said that the installation project of sports wood flooring is operated by the pavement engineer of the sports wood floor manufacturer. However, the stadium contractor and Party A should also arrange a special person to be responsible for tracking and supervision, and solve the problems in the installation of sports wood flooring in a timely manner.

1. Prevent uneven ground.

Uneven ground causes part of the floor and keel to hang in the air, making a noise when stepping on it.

Second, to prevent the keel from drying.

The moisture content of the undried wooden keel is usually about 25%, while the moisture content of the qualified wooden floor is generally 12%, and the humidity difference is too large to make the wooden floor absorb moisture quickly, resulting in the arching of the floor and the bursting of the paint surface. During construction, the floor is laid first, and then other construction is carried out on the floor. However, after the floor is laid, it often takes a month or more to polish and paint.

During this period, the floor is not isolated from the water vapor and chemicals in the surrounding environment, which is likely to cause the wooden floor to be deformed due to the rapid change in moisture content.

3. Prevent the assembly from being too loose or too tight.

When laying the floor, the assembly tightness of the wooden floor should be reasonably arranged according to the ambient temperature and humidity of the place where it is used. If it is too loose, the floor will shrink and there will be large gaps, and if it is too tight, the floor will arch when it expands.

Fourth, prevent the fixing method of using wooden wedges and iron nails.

In the construction, the fixing method of beating the wooden wedge and adding the iron nail will cause the nail holding force to be insufficient because the contact surface between the wooden wedge and the iron nail is too small, and it is easy to cause the wooden keel to loosen, and there will be a sound when stepping on the floor.

If the sports wood floor is empty, there are many reasons, one is that the sports wood floor is not fixed when it is laid, the main reason is that the number of nails used is not enough, or it may be that the nails are not firmly nailed. The sports wood floor sports system is fixed with glue liquid, and the gluing does not meet the requirements will also cause the sports wood floor to be empty.

The reason for the abnormal noise of sports wood flooring may also be that the moisture content of the sports wood floor used has changed.

In view of the common causes of sports wood floor empty wages, one by one elimination and prevention, we can effectively prevent sports wood floor empty wages.

When laying sports wood flooring, nails can not be used too little, in the laying process, each completed piece, must be tested with a foot step, if there is a sound of rework and then paving.

When purchasing and paving sports wood flooring, it is necessary to strictly check its moisture content, and the quality of the adhesive must also be strictly reviewed.

The common quality problems of wooden floor laying are the sound of empty drums when walking, the uneven laying surface, the loose joints, and local warping.

1) There is a hollow drum sound: the reason is that the wooden floor is laid and fixed insubstantially, mainly because the number of nails on the wool board and keel, wool board and the floor is small or not nailed firmly, and sometimes it is caused by shrinkage or unqualified glue caused by the change of moisture content of the board. In addition to the strict acceptance of the moisture content of the board, adhesive and other quality, the acceptance can be used only after acceptance, the nails should not be too little when installed, and should ensure that the nails are firm, each wooden floor is laid, and then install a piece after stepping on the foot to test that there is no sound, if there is a sound, it should be reworked immediately.

2) Uneven laying surface: the main reason is that the laying base is uneven or the wooden floor strip is deformed and arched. During the laying construction, the level should be applied for acceptance, the surface of the keel should be leveled, and if the laying is uneven, the skids should be adjusted.

A small ventilation groove should be made on the keel. A ventilation gap of 10 mm should be left between the edge of the laying board and the wall surface. The insulation and sound insulation material must be dry to prevent the floor from arching after being wet.

The flatness error of the surface of the wooden floor should be within 1 mm.

3) the joint is not strict: in addition to the construction of the laying is not standardized, the width of the plate size error and poor processing quality is also an important reason, in addition to carefully inspecting the quality of the floor in the construction, the installation of the tongue and groove plum should be tiled, nail in front of the board, with the module to mold the floor gap to the same and then nail the nail.

4) Local warping: In addition to the deformation of the board due to moisture, the main reason is that the joints of the wool board are too small or seamless, and the use of water pipes and other leakage blisters on the wet board. In the construction, it is necessary to leave a 3 mm gap when installing the wool board, and the wooden keel is carved with a ventilation groove.

After the floor is paved, the paint film should be intact when the floor paint is painted, and the water on the surface layer should be cleaned up in time to prevent water from flowing into the lower part of the floor in daily use.

First, the ground must be dry.

Second, the heating method, whether it is geothermal, geothermal to see if it is Zhonghui electric film heating, electric film heating environmental protection, health and pollution-free.

3. Housing environment.

Fourth, it cannot be close together, and there must be a gap.

Fifth, the ground must be level.

Wood flooring refers to the flooring made of wood, and the wood flooring produced in China is mainly divided into six categories: solid wood flooring, laminate flooring, solid wood flooring, multi-layer composite flooring, bamboo flooring and cork flooring, as well as emerging wood-plastic flooring.