-
Anonymous users2024-01-24If you don't use the green wire, the wall is charged because the wiring is not connected well or it has been a long time, there is something dirty between the fire wire and the wall, or it is too wet and leaky, it is recommended to check it and do moisture-proof and insulation measures.
1. The insulation of the dark wire in the wall is broken during the decoration. >>>More
Yes, it's actually enough, but this is a problem, it's an experiment, you plug this, everything lights up, the exhaust fan is turned on, it doesn't seem to have any effect, and the heat is sucked up. It's best to pull down the lamp cord and switch it to the bath bomb, so that it is better, and the superheated ventilation fan will automatically inhale.
The empty opening has been replaced, and the problem of empty opening can be eliminated. >>>More
This should be a problem with the circuit (neutral line) of the power line, find the circuit breaker in the distribution box to turn off the relevant control switch, and check to see where the open circuit occurs.
Theoretically, yes, but have you installed a 2P (zero fire) leakage protection switch? If it is installed, it will not be, and the leakage protection switch will detect as leakage (zero, fire current unbalance), and it will protect the trip.