Does the solid wood floor heating floor have high requirements for materials and manufacturing proce

Floor heating wood floor option 1: heat transfer should be fast.

At present, there are not many brands on the market that can provide thermal conductivity, and consumers should pay attention to the fact that products with high general coefficient have better performance in terms of thermal conductivity.

Floor heating wood floor option 2: good dimensional stability.

This point depends on the density of the substrate of the floor and the internal bonding strength, the higher the internal bonding strength, the better the ability of the floor to withstand temperature changes, and the phenomenon of cracking will not occur, only the substrate is a relatively dense wood floor, in order to ensure that it does not crack and deform at high temperature for a long time.

Floor heating wood floor option three: not afraid of humid environment.

That is, the expansion rate of the water absorption thickness. The floor used for radiant heating of the hydrothermal floor requires little dimensional change and the expansion rate to be less than or equal to the expansion rate in the high humidity state. In general, the smaller the expansion rate, the better the moisture resistance of the floor.

Floor heating wood floor option four: formaldehyde emission can not exceed the standard.

It is required that the formaldehyde emission will not exceed the standard under the condition of long-term heating. When consumers choose floor heating, they must choose the floor with low formaldehyde content as much as possible, because the higher the temperature, the more formaldehyde is released.

In general, the floor heating wood floor should grasp the principle of thin and not thick, good environmental protection performance and good heat resistance, and users should carefully distinguish when choosing floor heating wood flooring.

Yes, Jiusheng is very particular about the materials they use, and they are highly skilled.