-
Anonymous users2024-01-24This is too professional, it should be done by the installation master, the smart toilet is so expensive, how can there be no professional installation.
-
Anonymous users2024-01-23I'm a professional sanitary ware installer, and because each brand is different, I can only talk about the process.
Install the triangle valve first, then put it on the toilet, and aim it at the drain to see if the triangle valve is in the way. The bottom outlet of the toilet is connected to the sewer pipe with its own flange ring. Then install the seat cover, there is a diverter in the water inlet pipe behind the toilet, you install it at the water inlet pipe of the water phase, one end is connected to the triangle valve, and the other end is connected to the seat cover.
Look at the interface yourself), plug it in, and turn on the water. Turn on the main toilet switch and open the first toilet lid again, leaving the "O" seat. Press and hold the "O" seat with your hand, you can try the function keys one by one, all are normal, and then put a circle of glass glue on the bottom of the toilet.
It is ready to use after 24 hours.
Press the installation is sure to be able to install, but have you thought about it, when the water of the current smart toilet flushes the buttocks, you have wood to consider the water quality, will it carry a certain germs, if the water quality is not good, it is equivalent to washing the butt with unclean water, do you think it is healthy? ?
1. Turn off the inlet valve of the toilet bowl and drain the water in the toilet tank. >>>More
The installation of the wall-hung toilet is very simple, only there is a bolt fixed under each side of the back of the toilet, the drain and the water inlet are pre-reserved according to the size, and the drain and water inlet of the toilet are directly inserted into the pipe with the sealing ring after the lubricant is aligned, and the fixing nut can be tightened
There should be a flange inside The outer ring is tightly sealed and will not leak In fact, you can pour some water without sealing the value of the glue In general, the eyes are aligned No sticky glue does not pour water and does not leak Of course, a little bit of water will not have any effect As long as the upper and lower eyes are aligned The glue seal is tight.
1. It is the width of the toilet, because of the difference in shape, the width of different toilets is different, but it is generally 30CM to 50CM. For the average fat person, a width of 50cm is no problem! The height of the toilet bowl is not very concerned, usually the height of the toilet is about 70cm! >>>More