-
Anonymous users2024-01-24This new bath bomb, the switch is four on, isn't it.
1. After the new bath bomb is installed in place, there are three wires from the dark box of the ceiling, the ground wire is connected to the shell of the bath bomb, the zero wire is connected to the neutral wire wiring hole of the bath bomb, and the live wire is connected to the red line in the direction of the switch.
2. In the switch, there are still four yellow wires left in the L hole of the red wire connection switch that is connected to the live wire, connect one arbitrarily, turn on the switch to see which function of the bath bomb has a response, connect this wire to the corresponding wiring hole, and go on in turn, and it will all be connected.
3. As for the red and yellow wires, there is another wire used in the bathroom, connect one of them to the lighting wiring hole of the bath bomb switch, which wire is on, which one is connected, and the other one is useless, just wrap it with adhesive tape (because the bath bomb switch is here, generally you can't increase the switch, only with the bath bomb light, and at the same time, you can do it).
If the switch device needs to be powered off several times, it is necessary to pay attention to safety.
-
Anonymous users2024-01-23Hello, there are five wires under the bath bomb, which are two heating, one lighting, and one exhaust. The remaining one is a utility line, which is the neutral line and the power neutral line in parallel.
The four-position switch live wire is connected in parallel with the four switch small modules, and the four control wires are connected to the corresponding wiring holes.
Yes, you just need to change the cable that connected the original bath bomb to the infrared bulb to the heater. Excess threads can be dispensed with.
There is a problem with the lamp beads in this half of the flash. Replacing the lamp beads can solve the problem.
Two individually controlled switches on one panel are called double-open and single-controlled.
It is a small household appliance product for bath that combines various functions such as heating, infrared physiotherapy, bathroom ventilation and decoration through the ingenious combination of special waterproof infrared heat wave tube and ventilation fan. >>>More
Although they are three lines of fire, they are all in the same phase, and these three lines cannot be called fire wires, but "control lines."", only when the switch is turned on, it is charged! Due to the relatively large power of the living room lantern, in order to facilitate the control of multiple circuits and brightness of the headlamp, a multi-channel power supply method is adopted. Of course, there is now a microcomputer control switch on the market, the kind with a remote control, and the effect is quite good. >>>More