-
Anonymous users2024-01-24Bathroom waterproofing, generally we will directly recommend the use of mortar waterproofing agent, not only with the base surface sticky firm, but also high puncture resistance can be with the same life as the building, the use of the method.
1.Clean the construction site and sprinkle water to make it fully moist but there should be no stagnant water.
2.Wall: The total thickness of the waterproof layer (waterproof mortar + waterproof mortar) is not less than 10 mm for the wall, not less than 20 mm for the ground, and not less than 1800 mm for height.
1) Mix "Lauyer mortar waterproofing agent" with cement at 1:3 to form a waterproof mortar, and paint it once or twice on the base surface, with a total thickness of 2 mm.
2) After 20 minutes, after the waterproof mortar is dry, stir it into a waterproof mortar with "Laoyal" and cement and sand according to 1:2:6, and wipe it on the surface of the waterproof plain ash with a thickness of 8 mm.
After the waterproof mortar layer is solidified, it is cured by sprinkling water.
-
Anonymous users2024-01-23Because I did waterproofing cooperation a few years ago, it's good, my roof let them do a waterproofing a few years ago, and there is no problem until now, I suggest you can find them!!
-
Anonymous users2024-01-22This is not necessarily, doing waterproofing is not done by their company, it depends on the craftsmanship of the workers and the quality of the waterproof material.
You can ask for a five-element gossip Fu town house solution office, and there is a public toilet next door. Note: The Five Elements Bagua Zifu, the Five Elements Bagua Door Fu, these names that are easy to confuse, although the difference between one word, are not the Five Elements Bagua Fu.
The waterproofing manufacturing method:
The toilet space of ordinary residential buildings is narrow, and there are pipelines passing through the floor slab, so the coating is commonly used for waterproofing and the membrane is rarely used for waterproofing. >>>More
The websites of the construction worker's home, the construction network, the construction forum, and the president's home network are all better, you can go inside to see, there are many things in there that are more suitable for you. >>>More
In general, the shower area is at least 1800 mm high and the other walls are 500 mm high. The requirements of the bathroom waterproof standard are that the ground needs to be done all, and the wall is at least full high, and if it is a lightweight wall, then it must be done full height. As for the material, it is recommended to use kitchen and bathroom waterproof slurry.
Needless to say? Of course, there is a bathroom opposite the office. Although the smell from the bathroom is not good, it is very convenient to go to the bathroom, as long as you pay attention to the bathroom and clean it frequently. >>>More