-
Anonymous users2024-01-24The first choice of tools should be small and thin, and the surface should not be too rough, otherwise when inserted into the gap of the gusset, the physical structure of the surface of the gusset will be damaged and the overall aesthetic effect will be affected.
Secondly, when prying open the gusset, it is necessary to use force slowly, and the force should be even, and it cannot be only used at one point, and pry it open in the side seam of the gusset, otherwise the gusset will be bent and damaged, and it cannot be used in the later stage.
Finally, after a piece of gusset is removed, the remaining gusset can no longer use tools, can be reached into the gusset by hand, directly dismantled, when removed by hand, it should be evenly pressed down, and the force can not be too large when dismantling, otherwise it will also damage the ceiling and affect the appearance.
I've been doing it for the past two years! Directly with the hanging bar dry connected to the Z-shaped steel supporting the canopy (I am here in the Z-shaped steel, I don't know yours, right?) Note: >>>More
1. C-shaped steel or Z-shaped steel, Z-shaped steel is better; (all galvanized folded plate purlins) 2. Permanent load: color steel insulation corrugated roof; Single-sided color corrugated plate; Light steel keel gypsum board ceiling without insulation; Variable load: roofing maintenance personnel tools, etc. are concentrated in the middle of the span; The snow load on the roof is calculated according to the geographical location look-up table; The ash load is checked according to the use of the plant; >>>More
Remove the bulb, find the screw holding the lamp holder in place, and unscrew the screw.
Your home should be an aluminum gusset ceiling, the gusset and the keel are sandwiched during installation, and the four sides of the gusset will generally be filled with glass glue. So when you dismantle it, you use a utility knife to buckle it on the gusset seam and buckle it slightly, and you can remove it.
1. Dismantle the door sleeve line.
2. Dismantle the door leaf. >>>More