How high is the decoration waterproofing How to do kitchen waterproofing What are the suggestions fo

How do you do kitchen waterproofing?

1. The waterproof treatment of the kitchen is also important, because the kitchen is equipped with base cabinets and hanging cabinets, not only to pay attention to the waterproofing in the kitchen but also to prevent water from leaking outward.

2. Clean up the construction site and sprinkle water to make it fully moist but there shall be no stagnant water.

3. The variety, brand and mix ratio of waterproof materials must meet the provisions of relevant standards of environmental protection standards. The product has a certificate of conformity.

4. The basic layer of the waterproof layer shall not be uneven, loose, hollow, sanding and cracking. The moisture content is less than 10%. The waterproof layer of the kitchen floor with floor drain is upturned from the contact with the wall around it, not less than 25 cm above the ground, no flooding, no water accumulation, and no leakage in the 24-hour closed water test.

5. The waterproof layer is firmly pasted, without slippage, skid, blistering and wrinkles. Floor drains, drains, etc. should be kept unblocked, and protective measures should be taken during construction.

6. The pipe roots that pass through the walls, floors, etc., should be protected, and should not be damaged and displaced. Fine-grained treatment of all parts that are prone to gaps to prevent leakage.

7. Kitchen waterproof construction, first pre-bury the water supply and drainage pipes, clean up the flat wall and ground base, scrape a layer of plain cement slurry to dry, and complete the wall and ground brush twice the waterproof material at one time, or do the wall waterproof first, the interface must be dealt with, the upper and lower cross handover should be 200mm, double-layer waterproof.

8. The total thickness of the wall waterproof layer (waterproof mortar + waterproof mortar) is not less than 10 mm, and the height is not less than 1800 mm.

9. Mix waterproof products with cement into waterproof mortar, and paint once or twice on the base surface, with a total thickness of 2 mm.

After a few minutes, the waterproof mortar is dry, and the waterproof mortar is stirred with cement and sand to form a waterproof mortar, and the surface is smeared on the waterproof plain ash with a thickness of 8 mm.

After the waterproof mortar layer is solidified, it is cured by sprinkling water.

How high is the right waterproofing for the kitchen?

In addition to the ground needs to be waterproofed, the kitchen also needs to be done on the wall, so the waterproof calculation of the kitchen needs to add the wall in addition to the ground. The height of the wall is often 180 cm, because the height of the person is taken into account, and the height of the water pipe. Of course, you can also do it a little lower, so that it is a little above the water pipe.