-
Anonymous users2024-01-24Four common ways to remodel toilet drains: how to displace toilet drain pipes.
Small-scale shifting: use a special shifter for lifting, there is CM, it is recommended not to exceed 10CM shifter, which will affect the effect of punching and draining.
Large-scale displacement: floor elevation (generally 20CM high), pipe discharge, pipeline should have a certain slope, but the distance should not be too long, the distance is long, the slope of the pipeline should be larger, the ground elevation will increase, and the flushing effect will also be affected. The drain pipe can be connected to the original pothole, or it can be connected to the sewer main with 3 passes.
Perforated displacement of the floor slab: If it is a duplex or a villa, you can make holes in the floor slab and re-take the installation.
Wall-row toilet: If possible, you can choose a wall-row toilet, as long as you build a short wall, the pipe is directly connected to the sewer main.
About 5 degrees, just don't have standing water.
Ground slope. Basic interpretation: the tangent value of the acute angle between the slope and the ground can be understood as the ratio of the height difference between two different points on the slope and its horizontal distance, or the angle between a diagonal line drawn from the top of the measured slope to the bottom of the slope and the horizontal plane based on the horizontal plane, which is the ground slope. >>>More
35-45 cm (center distance).
It is best to determine the way of water coming out of the toilet before leaving the pipe, and then communicate with the decoration worker to understand the thickness of the sticky brick on the wall, and it is best to determine the location of the pipe. The toilet outlet is divided into two types: the front water outlet and the rear water outlet, the front water outlet distance is 40 cm, and the rear water outlet is 30 cm, but considering that the wall of the bathroom should also be arranged with water pipes, and the bricks should be glued after waterproofing, so it is necessary to leave 3-5 cm more. >>>More
7 meters of sewer pipe 11 cm thick to make a slope of several meters.
The toilet reserves the distance between the sewer and the wall, and the toilet selection tool can be 30 cm to 40 cm according to the room type of the toilet and personal preferences, which is relatively normal, and the strong one who can reserve 20 cm in actual operation, and the actual distance from the center line of the sewer, the actual distance of the bridge deck can be 32 cm to 42 cm, and there will actually be an error of 10 cm, which is very normal.
Slope of drainage cast iron pipe, slope of drainage PVC pipe. >>>More