How to get a siphon toilet

1.Reason: The main reason is that there is a blockage at the "duck neck" of the rising part of the toilet!

The reason is that this part often stores water, and the scale and urine scale will precipitate to the wall, and the outer part can be washed off with the toilet cleaner, and the inside can't be washed off! Over time, the scale on the pipe wall becomes thicker and thicker, and the effective pipe diameter becomes smaller and smaller, and there is a blockage! Many people can only replace the toilet with a new one at this time, resulting in waste!

2.Solution: Drain the water in the toilet bowl (finally use the collar net bottle to blot it), pour the strong toilet cleaner to the usual water surface, soak it all day, and then reach into the "duck neck" and use a wooden stick such as bamboo chopsticks to remove the dirt (the toilet bowl over 10 years old can reach 1cm thick), and the toilet can be used as new!

I used this method to fix my American brand toilet!

Press down the drain with the toilet faucet first, then fill up the water, preferably to the top, and then quickly pull it out!

Jinwei Desheng bathroom.

From the perspective of flushing methods, toilets can be roughly divided into: flush toilets and siphon toilets. The difference between a siphon toilet and ordinary flushing method is that it flushes the water while passing through a special curved pipe to reach the siphon effect, which quickly discharges the dirt.

The siphon type is divided into flush type, vortex type, radial type, etc. The siphon vortex type and radial type are equipped with a special water inlet channel, and the water of the water tank flows into the toilet under the level surface, so as to eliminate the noise generated by the air impact in the pipe and the water falling when the water enters the water tank. That is, the "silent toilet" currently being implemented on the market.

The siphon radial type has a common faucet that radiates a strong flow of water for better flushing.

The siphon toilet has an intact pipe, with an inverted "S" in the shape, and the slope of the pool wall is gentle, and the noise problem has been improved; It has the characteristics of strong sewage discharge ability and large clean surface, so most toilets, especially conjoined ones, use siphon type.

The biggest advantage of the siphon type is that the flushing noise is low, which is the so-called silence.

Siphon toilets tend to flush away dirt that adheres to the surface of the toilet, but the water storage area at the bottom of the toilet increases. The siphon pipe is relatively high and slender (the smaller the pipe diameter, the more obvious the siphon effect and the greater the pumping force).

The working principle of the siphon toilet is to use the siphon phenomenon of flushing water to fill the sewage pipe of the toilet to discharge the dirt. The construction of siphon toilets is characterized by the fact that there is an intact pipe in the toilet body. The shape is side-inverted "S" shape, and the water level difference when applying water supply promotes the composition of siphon action, because the dirt is not washed away by hydraulic force, the slope of the pool wall is slow, and the water storage area of the pool bottom is also expanded.

The biggest feature of siphon toilets is that they are low in noise.