-
Anonymous users2024-01-24Light steel keels are generally used as ceiling frames, which are then covered with gypsum board. According to the load-bearing, the light steel keel ceiling is divided into the light steel keel ceiling and the light steel keel ceiling.
According to the keel cross-section, the light steel keel can be divided into: U-shaped tannian keel, C-shaped keel, and L-shaped keel. According to the specifications, it can be divided into: Gaolu D60 series, D50 series, D38 series, D25 series.
-
Anonymous users2024-01-23The minimum distance between the light steel keel ceiling and the original roof is 10 cm.
Light steel keels are generally used as ceiling frames, which are then covered with gypsum board. According to the load-bearing, the light steel keel ceiling is divided into the light steel keel ceiling and the light steel keel ceiling.
According to the keel section, the light steel keel can be divided into: U-shaped keel, C-shaped keel, and L-shaped keel. According to the specifications, it can be divided into: D60 series, D50 series, D38 series, D25 series.
-
Anonymous users2024-01-22Ten centimeters with a cassette keel is enough.
The box with the hidden lamp is about 2 centimeters away from the top, and it is not good to look at it if it is low, and its lighting is not good, and it is much darker. And our floor height is not high, and no matter how low it is, it will be ugly. So add a walk flat and light box height, generally 5 + 10 = 20 cm or so a little bit is fine.
The distance between the first main keel of the light steel keel ceiling and the wall is 30 cm. >>>More
Ceiling installation steps.
1. Installation: 1. According to the height required by the design, determine the horizontal position of the ceiling on the wall, mark it with a mark, and elastic the line. >>>More
I've been doing it for the past two years! Directly with the hanging bar dry connected to the Z-shaped steel supporting the canopy (I am here in the Z-shaped steel, I don't know yours, right?) Note: >>>More
Hello! The boom is welded or bolted to the steel structure roof, and the other practices are the same as those of ordinary light steel keels. >>>More