-
Anonymous users2024-01-24The furniture painting room should be in an open area so as not to affect the surrounding residents.
Furniture painting room, which is to stop spraying paint on filter painting tools in a room, is currently also called furniture paint room. Traditional painting is to use a nozzle to paint utensils (cars, furniture, etc.) in the open air, but how to use a wide range of appliances will make the quality of painting low, for example: the dust in the atmosphere will be mixed in the paint during the painting process, and then the quality of the paint will be reduced; There is uncertainty about the paint throwing, and the painting area will be very dirty; On the one hand, it will be very dirty, and on the other hand, it will inhale a lot of paint mist and be unlucky to the body.
Later, people wanted to set the painting within a certain range, so the earliest spray paint booth --- exhaust spray booth occurred, and the first paint spray room in China was in the 90s of the last century.
-
Anonymous users2024-01-23First of all, do a good job in the sealing of the plant and design reasonable ventilation ducts;
Secondly, a reservoir with exhaust ports is set up outside the plant, and the ventilation duct leads to the pool, so that the paint condensation is suspended on the water surface.
In this way, the impact on the surrounding environment is not very large...
-
Anonymous users2024-01-22It's really hard to get it on a large scale.
You can look for articles that are more professional in VOC treatment. However, if you really want to deal with it, the cost is relatively high, and the vast majority of large-scale furniture companies have directly discharged. When you go to the pool, the amount of VOC dissolved is very small, at most it absorbs some small particles of paint mist, and in most cases, it ends up polluting the environment.
In addition, you simply use water-based paint, so that there is no taste, for example, Carberry, Reba, and Changsheng water-based paint are all good.
Paints and water-based paints have their own merits.
-
Anonymous users2024-01-21On the dust removal equipment, we have put several pieces of equipment on the furniture factory.
Hebei Weituo Environmental Protection and Energy-saving Machinery Factory.
Generally, the fog paint parts are in the dark corner of the furniture, the junction point of several faces, and the dead angle position, the reason for this phenomenon may be that the paint concentration is too high, the paint atomization is not good, resulting in poor paint production, and the spray gun moves too slowly, so that the paint atomization is better and the paint is smoother.
1. All furniture painting is the most common, and the furniture paint will not fall off if you brush a little better, many well-known furniture brands use Dabao paint, you can try this.
11 panels, a panel is 2400 * 1200, that panel is about 3 square (both sides) a group of wood paint can be sprayed about 17 squares, you spray with white paint, how to brush the primer,
Bottom coat or face coat. It's nothing more than a thinner, a landline, a nitro.
Add an appropriate amount of whitening water to the paint in the final process. (Slow drying water) can remove fogging, and can reduce the impact of flying paint on the surroundings. The most important thing is that it needs to be ventilated. Reduces the residence time of paint mist in the air.