-
Anonymous users2024-01-24The general interior should be drawn in strict accordance with the actual size, and the furniture should be placed in accordance with the proportion, if there is not enough space in it, it means that the space is too small, and it is not suitable for placing so much furniture or such a large amount of furniture.
Shrinking furniture is to pay attention to shrinking according to the actual needs of furniture, not all SC. For example, the width of the bed can be reduced from 1800 to 1500 or 1200, but the length of 2000 cannot be reduced; There is also a wardrobe, the width can be reduced, the depth cannot be reduced, it should be maintained at a depth of 550-600. However, if you use SC to shrink, the length of the bed will be reduced, and when it is actually placed, it will not match the drawings and mislead customers.
This is a common trick used in real estate sales books.
-
Anonymous users2024-01-23I don't think it's a problem with CAD furniture being too big or too small, it's a design problem. Although the figure in the software is fixed, I think that as a designer, we should know how much size is barely usable, sufficient, and comfortable to use, and it will involve many aspects if you study it carefully, such as ergonomics, manufacturer mold size, etc.
The furniture is too large, first of all, first measure the specific size of the map, such as a bed, 2200 length in the block, then of course it can be reduced, reduced to 2100 or even 2000, the specific situation must meet the needs of the owner, but can not give up the demand for the most basic functions of the room for the sake of the beauty of the drawing; If it is reduced to 1800 and it can't be put down, then whether you consider whether the room itself is suitable as a bedroom, maybe it is more suitable as a study.
-
Anonymous users2024-01-22Measure it and see how big the room is! Then measure and reduce the size of the furniture, there is always the wrong proportion, either the picture or the furniture, or the design is not well designed!
Your master is really %@ %, didn't he mean to teach you well.
Is it just "keeping a hand".
-
Anonymous users2024-01-21Hehe. There's nothing to say about this, in reality, how big is the space, how big is the painting in CAD, how big the furniture is, put the furniture inside, put it on the side, you can't put it on it, you can't put it in, you can change the plan and put something else into it. How else can it be done?
When the scale is printed, it is adjusted.
1. All the top of the hanging tile indicates that the wall is more bricked, if there is a gap between the wall tile and the ceiling, you can use gypsum lines, and then press the strip to finish. If the gap is too large, you can re-paste a tile, and look at the size of the gap to determine the later construction plan!
Area coverage can only be straight segments, so in general, non-straight segments should be made into short and connected straight segments. Generally, the flatten command is used to solidify the line. The details are as follows: >>>More
What should I do if there are cracks in wooden furniture? Star Awareness Project
Zhengzhou Shunli Moving Co., Ltd. has a history of many years. It has been mainly engaged in moving, freight, logistics and other businesses. We strive for development and have strict requirements for employees. >>>More
In fact, you can know a lot about this method. For example, activated carbon, many people used to remove formaldehyde before activated carbon, but how to say it, activated carbon to remove formaldehyde is more general, a small amount of formaldehyde is OK, if there is more formaldehyde, you still have to spray herbs. Yalin to remove formaldehyde, this kind of thing actively contacts the source of pollution treatment, and nothing else works. >>>More