-
Anonymous users2024-01-24The toilet bowl pops up by itself, and the water does not flow, but only when it is pressed all the time
Press the toilet bowl and bounce up the wheel, the water does not flow down, only if you keep pressing it, you will flow pro! Hello, happy to answer your <>
Pro-toilet drain press a little water, to keep pressing it, what's going on that means that the toilet button spring is broken. The toilet bowl is generally used with two buttons, the large button car leak is fixed and rotten, press it, it will put all the water in the toilet at one time, and the impulse of the toilet is also the largest; There is also a smaller button, pressing it will bring out a small amount of water, and pressing it will keep flushing the toilet until the water is exhausted. Hope mine can help you <>
Do you have any other questions?
-
Anonymous users2024-01-23Open the lid to see if the chain of the water seal is long, it should be that the chain is raised to a certain height, and when the water flows down to a certain amount, a siphon is generated and the water seal is sucked at the water outlet to block the water flow. You are now pressing the water, do not press out, it should be the height of the water seal chain is not enough, the water flow is small, the shape is not a siphon, the hand is loose, the pressure of the water will cover the water seal again, check it to know.
If you buy a high-end sofa, that is, a sofa worth more than 20,000 yuan, it is not a treatment problem, but the effect made by the manufacturer, but according to your description, it should be an inferior manufacturer's goods, and then it will be like that, because the price is cheap. It won't be more than 10,000 If there's a picture of the sofa, I can tell you why, there's no way you can handle it, forget it unless you go for a different brand. Or change to a good brand of casual sofas.
Lift the lid of the water tank, look in the water tank and you will find a plastic screw and spring, and you can screw it on.
I'll tell you a soil method, you stir the soap with a little thicker soapy water, take off the upper cover of the water tank, pour the soapy water on the control button, press it up and down a few more times, and you can play it up, simple, trouble-free, no need to find someone to repair. You try. Good luck.
Your toilet water part is broken, you need to replace a water part normally, I am in the Chaozhou toilet production base, these problems are very simple.
Check the main valve for tap water first, and then open the lid of the water tank to check the upper and lower water, it is possible that the drain of the toilet has blocked the foreign object. See if the piston can be plugged, if you can't plug the water tank, it will leak, and if the water tank is not satisfied, the switch will not reach the water. It is also possible that the plug of the plugging tank is broken, or the connection with the button is loose, which will lead to the phenomenon of no water.