What should I do if the anti theft door tongue does not return

1 answers

Anonymous users2024-01-24

Use a pencil to draw on the deadbolt, or use oil (do not use cooking oil) to lubricate, if it is ineffective, you must remove the internal oil or replace the lock body.

Related questions

The square tongue of the anti-theft door lock cannot be retracted

1 answers2024-08-02

Start with two aspects to solve the problem, one is if it is rusty because of lack of oil, put on some sewing engine oil or car engine oil. The second is to remove it and check the deadbolt spring, it may be broken or dislocated, and you can deal with it.

After the security door is opened, some deadbolts do not return to their positions, so ask for help

2 answers2024-08-02

This is best to find a professional door repair, the problem is more and miscellaneous, you can try it yourself, the door in the case of opening the key lock and then open, to see if the rotation is normal, if normal, it should be the door on the deadbolt and the door frame of the empty place is not aligned, if it is not normal, it may be the heaven and earth rod and the side lock point is not right, check it, there is a lock body and the lock cylinder whether there is a problem, you can remove the lock body and the lock cylinder and then try to see if the rotation is normal, the other is not easy to explain, I suggest it's best to find a professional to see it.,Just be careful of being told to change things and prices.,I hope it can help.。。。

There is also a small oblique tongue in the middle of the anti-theft door

1 answers2024-08-02

For power assisting, the door will be very light when closing, also called silent oblique tongue.

The deadbolt of the anti-theft door lock is deformed and can't go back, can you fix it yourself?

4 answers2024-08-02

The deadbolt of the anti-theft door lock is deformed and can't go back, can you fix it yourself? >>>More

What should I do if the lock tongue of the anti-theft door is broken and cannot be opened

6 answers2024-08-02

Then use a flat chisel to directly hit the connecting rod, if the deadbolt is dragged out, in the case of the connecting rod can be seen in the gap of the door, then this gap will increase in this case, you first need to judge what is the problem, if it is really a problem with the deadbolt, you can judge it in combination with the situation after you usually close the door, so as not to pry the appearance of the door yourself, if the deadbolt runs over, according to the conventional judgment, you can open the door after breaking, and there is a simple way, you can first use the airbag to support the gap of the door, If there is no problem with the deadbolt, there is no gap or only a little gap when the handle is pulled after closing the door, and you need to find someone from the lock picking company to solve it.