-
Anonymous users2024-01-24Normally, it is about 70 cm above the ground. But as soon as you move it higher than the bedside table, it's about 10 centimeters. Electricians know it.
-
Anonymous users2024-01-23Place your bedside table as high as it is on the bedside table, and the box is 10 cm low from the counter.
-
Anonymous users2024-01-2230 to 50cm
-
Anonymous users2024-01-21Preferably 20 cm away.
-
Anonymous users2024-01-20Bedside table socket height: between 70-80cm.
Higher than the bedside table, lower than the bedside, the bedside table height is generally 55-58, so the socket position is set at 10cm higher than the bedside table, if it is a lamp switch, of course, and the socket is separated, the switch position of the lamp is 1 meter, the socket is 30 cm above the ground, so as to be installed 5 to 10 cm above the bedside table, so that the wall is inside, do the socket with a safety switch, so that it is safer.
The standard distance of the power socket from the ground is 30 cm, but in special places, the height can be appropriately modified according to your own convenience.
Bedside table socket height: between 70-80cm. Higher than the bedside table, lower than the bedside, the bedside table height is generally 55-58, so the socket position is set at 10cm higher than the bedside table, if it is a lamp switch, of course, and the socket is separated, the switch position of the lamp is 1 meter, the socket is 30 cm above the ground, so as to be installed 5 to 10 cm above the bedside table, so that the wall is inside, do the socket with a safety switch, so that it is safer. >>>More
It is about 6-7cm from raw ground to full-scale ground. The height of the floor is 4cm, the thickness of the floor is about 18 20mm, the height difference of the ground can be calculated as 1 2cm, and the bedside table socket is calculated as an ordinary socket if placed on the bedside table, and the bedside table socket should be 10 15cm higher than the bedside table if placed above the bedside table.
The height of the bedside table socket is designed according to the convenience of use, and the following design is recommended: 1. Reserved socket positions on both sides of the bed, and the distance between the socket and the left and right sides of the bed is about 20cm; 2. Move the vertical height of the socket to the top of the bedside table, such as 55-60cm above the ground. In this way, it is convenient to plug and unplug when using it in the future; 3. Two sockets can be designed side by side on each side. >>>More
Bedside table socket height: between 70-80cm.
Higher than the bedside table, lower than the bedside, the height of the bedside table is generally 55-58 Bu staring, so the socket position is set at 10cm higher than the bedside table, if it is the switch of the lamp, of course, it is good to separate from the socket, the switch position of the lamp is 1 meter, and the socket is about 30 cm from the ground, so as to be installed 5 to 10 cm above the bedside limb cabinet, so that the wall is inside, and the socket with a safety switch is made, so that it is safer. Type modification and. >>>More