-
Anonymous users2024-01-24You asked this question in 2010, I also encountered the same problem in 2019, and solved it myself, there is an explanation of the logo in front of the atlas, which is generally written as one of F1 or F2, so I don't think it's all done, if you don't write it, you can choose one of them, and if you write it, you can do it according to the F1 or F2 given.
-
Anonymous users2024-01-23Didn't even understand what your problem is, what F12, F1, F2?
Are you talking about the practice on the atlas?
Toilet waterproofing practices:
The toilet space of ordinary residential buildings is narrow, and there are pipelines passing through the floor slab, so the coating is commonly used for waterproofing and the membrane is rarely used for waterproofing. >>>More
It's just a ground sub-item. It is necessary to do waterproofing, go into the water, and do a water pressure test after it is done.
Do waterproofing needs to be done on the surface of the water, dig excellent permeability crystalline waterproofing, you can do it yourself on the cement surface with a super permeable waterproof guard (if there are cracks and potholes on the cement surface, fill the complete with metin porcelain glue and then do waterproofing). >>>More
The floor heating thermostat you are talking about should be a water divider. Place it near the entrance pipe, generally under the shoe cabinet and under the kitchen cabinet. The water separator controls the inflow of water from the underfloor heating pipes in all living rooms. >>>More
If the waterproofing is not done well, the water in your home leaks into the floor slab, and even if you don't use water, the water in the floor slab has not penetrated completely, and it may take longer to do so.