-
Anonymous users2024-01-24The most common reason why the water flows more than that.
1. If the flush valve cover is not tightly closed, there may be silk threads, hair and other objects stuck in the water outlet. Clean it up.
If it doesn't work, you can change it to a new one for 5-10 yuan.
Second, the inlet valve is not tightly closed, first try to lower the float. Probably just fine.
No, the inlet valve should be replaced. 15-40 yuan (single-flush old-fashioned toilet).
-
Anonymous users2024-01-23There is a soft snakeskin pipe under the toilet tank, you can find the interface with the water pipe along the snakeskin pipe, some have a switch at the interface, some do not, if not, you first turn off the main switch of your home, and then open the toilet tank lid to see if the contact inside is not good, live or the plug inside is aging, change the parts inside, etc. Let's open it first.
-
Anonymous users2024-01-22You can find the water inlet by following the water inlet pipe, and the water flow should not only be the water in the tank.
You mean a water tank running down the toilet, right? In that case, the flush valve is broken, just replace it with a new one, and then if you cover the cover plate on the toilet tank and keep running water, that is, the screw rod under the button on the cover plate is too long, just make it shorter.
There is a float in the toilet bowl (usually a round ball, which is empty), when the water is full, the float covers the water inlet upwards, and when the water is less, the float sinks, and it keeps entering the water until the water is full. There is also a plug inside, which is connected to the outer knob with a string, and when you need water, twist the knob, and the lid inside will be opened, and the water will rush out.
Step 1: If the toilet bowl keeps flowing, check the guide and wire rope used to raise and lower the ball plug and make sure they are aligned. >>>More
Check the water tank. It is possible that the tank float is broken, which needs to be replaced. It is also possible that the bolt of the outlet at the bottom of the tank is loose, just put your hand into the bottom of the tank and tighten the bolt. I hope my answer can help you.
It depends on what your tank looks like. You can see for yourself that the thing that can cover the water pipe nozzle in the water tank is controlled by that piece, and then see whether the position of the piece has changed or broken, and if it is broken, it needs to be replaced. >>>More