How big should a single bathroom be in a 20 square meter room?

Updated on Bathroom 2024-08-22
2 answers
  1. Anonymous users2024-01-24

    The common one is the middle partition. Then the middle is separated by a shower room.

  2. Anonymous users2024-01-23

    There are 3 or 4 square meters on it, you can consider putting a toilet and shower, and you can also put a standing basin in the corner.

Related questions
9 answers2024-08-22

Due to the large amount of water used in the bathroom, a waterproof layer is required for this purpose. How high is the bathroom waterproof? PChouse will take you to find out. >>>More

3 answers2024-08-22

Waterproof is generally brushed three times, and cross brushing is fine. If there is a floor drain in the kitchen and balcony, brush a little around the floor drain. >>>More

1 answers2024-08-22

Generally, the wall is 30-50 cm, and the shower area should not be less than 180 cm. Of course, the higher you do, the better!

3 answers2024-08-22

Look at the structure of the house, where is the right place (convenient to use) to put there.

15 answers2024-08-22

Generally speaking, we should do this once, but because when decorating water and electricity, it is inevitable that the original waterproofing facilities will be destroyed, so before the tiles are applied, we will do the waterproofing work again, that is, the waterproofing of the toilet should be done at least twice. The base surface of the first brush is uniform and dense, and each brush should not be too thick, otherwise it is easy to delaminate and not easy to dry. When brushing teeth, you should pay attention to whether the paint (especially the base material) has precipitation, stir evenly in time, soak each time, and stir at the bottom of the bucket several times to avoid precipitation. >>>More