Whether the exterior wall between the bathroom and the kitchen is a partition wall

Updated on Bathroom 2024-08-03
3 answers
  1. Anonymous users2024-01-24

    If it is a brick house with a thickness of 120, it is a partition wall, if it is a newly built building, please knock your head on the wall, the echo is dull bass is a shear wall, if the echo is very empty, it is a partition wall, of course, you can also knock it by hand.

  2. Anonymous users2024-01-23

    ?Want to knock?

    If the thickness is greater than 200mm, it may not be able to knock.

    Look at the original picture given to you by the developer, if the wall is all marked with black or a very dense slash, it is a load-bearing wall, and it cannot be knocked.

    If it's just two lines, it's fine, and if you want to smash it, you can smash it.

  3. Anonymous users2024-01-22

    From the current structure of the home room, it can be a partition wall.

Related questions
2 answers2024-08-03

It is estimated that the waterproofing of the bathroom is not done, and the water seeps into the wall, so you can only wait for the wall and the ground to be completely dry, and re-do the waterproofing in the bathroom, and the waterproof layer should extend from the ground to the wall, 250MM higher than the ground, and the height of the waterproof layer of the bathroom by the shower head wall shall not be less than 1800MM; THE WATERPROOF LAYER OF THE COATING FILM IS EVENLY BRUSHED, THE GENERAL THICKNESS SHALL NOT BE LESS THAN 1 5MM, THE WATERPROOF SURFACE OF THE COATING FILM IS NOT BLISTERED, NOT FLOWING, SMOOTH AND CONCAVE, AND IT IS BEST TO DO A 24-HOUR WATER STORAGE TEST AFTER THE WATER IS DONE TO CHECK THE INTEGRITY OF THE WATERPROOF LAYER. After confirming that there is no problem, rebuild the wall and floor.

1 answers2024-08-03

Is it measuring? This needs to be measured, whether it is calculating the amount of tiles used or customizing the whole kitchen or bathroom cabinet or something, you need a specific size.

1 answers2024-08-03

It is possible that water from the toilet side leaks through the wall to this side of the room, causing the latex paint to crack. If you want to repair it, there will be traces of repair after applying latex paint again.

3 answers2024-08-03

It is best to carefully analyze the load-bearing strength of the partition wall!

1 answers2024-08-03

If it is moisture-proof, do not use it. If the floor of the kitchen and bathroom is raised, the lightweight partition panel can be raised by 20 cm. I hope my answer can help you.