The TV in the living room has a signal, and the TV in the bedroom has no signal, how to connect

Updated on Living room 2024-08-13
1 answers
  1. Anonymous users2024-01-24

    1. The signal attenuation of the cable TV line you pulled is too serious.

    2. The line between your living room and the bedroom is not smooth.

    3. There is a problem with the way you connect the tee.

    4. Your cable TV does not handle the alphabet card service.

    Question 1: You can change to a better signal data cable as well as the jack with a signal cable to improve the quality.

    Question 2: You go to the electrician who draws your wiring.

    Question 3, you go to draw the master who will give you the three links.

    Question 4, you go to the radio and television business hall to apply for a letter card, and buy a cable set-top box and put it in the bedroom.

Related questions
TV has a signal in the bedroom, and there is no signal in the living room, is it necessary to change
1 answers2024-08-13

Hello, the location of your router is not good, you can install it in the living room or something, so that the signal is enough.

Why does the TV have a signal in the living room but not in the bedroom?
2 answers2024-08-13

One end is plugged into the closed circuit and the other end is plugged into the set-top box.

The cable CCTV signal was poor, the TV signal in the living room was good, and the two TVs in the be
1 answers2024-08-13

How far is the living room from the bedroom? If it is not far away, check the distributor, and then carefully check whether the line interface has a short circuit or open circuit.

The wireless signal in my living room is not good, and the wireless connection that comes with the T
2 answers2024-08-13

It can only be said that it may be better, but the overall quality is not very good, it is recommended that you make the wireless transmitter closer to the living room.

As soon as the living room light is turned on, the TV just has no signal, what's going on
4 answers2024-08-13

The living room light may use high-frequency electronic lights, and the TV cannot work because of high-frequency interference with the TV signal. Change the lights!