-
Anonymous users2024-01-24Water vapor will cause the electrical appliance to get wet, and after the electrical appliance is damp, the air switch with leakage protection will judge the electrical leakage, and the leakage will trip.
Household appliances such as LED bath bombs should be connected to the lighting line, and the air switch of the lighting line is not protected from leakage, and a slight water vapor will not cause tripping.
The main reason for this problem is that the air duct of the exhaust fan is blocked, and it is not your exhaust fan air duct that is blocked, but the main pipe is blocked, when your exhaust fan is closed, the check valve of the exhaust fan is not closed, so the turbidity in the air duct of the exhaust fan will not go to the room, and when you turn on the exhaust, the exhaust fan exhaust at the same time, you can not blow the wind down the air duct, but at the same time as blowing, the turbidity in the main pipe returns to the space of your bathroom. At such a time, the turbidity of the bathroom is even more powerful, this problem should be completely solved, only let the exhaust fan change the position of the exhaust pipe, that is, re-arrange the air duct, do not go to the main pipe exhaust, should be the exhaust of the main pipe is not able to rely on your ability to dredge, the main pipe of the tuyere can be blocked, static electromechanical technology can provide you with the answer to the problem in the use of the exhaust fan.
1. The exhaust fan is the most beautiful when installed on the ceiling, and can be in a plane with the ceiling to form a whole; >>>More
The toilet exhaust fan does not need a socket when it is installed, and it is controlled by a switch below.
It is estimated that it is the winding inductance of the exhaust fan motor, the high-voltage self-inductive electromotive force generated at the moment of the exhaust fan start-up (the principle is introduced in junior high school physics), and the distributed capacitance between the wall switch traces (the capacitance is the path to the AC) is connected into the LED circuit disconnected by the switch, which instantly forms a larger leakage current than that of the non-inductive electrical switch, which causes the LED to drive and start the LED to light up. >>>More
This electrician should not be professional enough, the two live wires are connected to the lights and exhaust fans respectively, and the other end is switched, and the two neutral wires are connected.